Hoyt Carbon RX-9 Bow Package- RedWrx RX9 -65 to 75 lb- Black - LEFT Handed
For more detailed photos and a full item description please click on the link provided below:
This bow was used VERY sparingly through one past season. It has been very well cared for in that time.
MSRP on bare bow alone was $2100 before you add a single accessory, the custom colored string, or any set up.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not really interested in selling bare bow only.
Bow Specifics:
- approximately 30 9/16" axle to axle
- 342 fps ATA
- 6 1/8" brace height
- 75, 80 or 85% letoff
- 4 lbs (bare bow only)
Here are the specifics:
-LEFT Handed
-The bow is set up with HBX Gen4 cams. With this cam, this bow can be set up anywhere from 25 through 30 inches in draw length in any 1/4 inch increment with the correct module set installed and set to the correct locations.
I HAVE ONLY THE #2, 3, 4 and 5 MODULE SETs FOR THE BOW.
THIS MEANS I CAN SET THE BOW ANYWHERE FROM 26.25" to 30" inches in draw length ONLY.
-The riser of the bow is in the factory black finish.
-75 pound limbs in factory black finish.
The limbs will adjust from 63 to just over 75 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string set is the original factory set from Hoyt. They are in very good used condition as they have been shot very little. They were custom ordered through Hoyt in the yellow color you see here. I would rate them a 9 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Trophy Ridge Fix-5 in black finish. Very nice sight. 5 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. Aluminum construction, 2nd axis leveling, onboard adjustment tool. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Hoyt Carbon Pro Stack 6 inch in black finish. This is a nice stabilizer in both look and function. It carries the Hoyt name along with Hoyt stealth discs to change up the color on the stabilizer should you choose to do so - the yellow is installed to match the current set up.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The rest is a Hamskea Epsilon.
Those of you who know and have used Hamskea know of the great features and qualities of their rests.
Information from Hamskea:
The Epsilon Arrow Rest is the newest edition to the Hamskea Arrow Rest lineup. It is lighter and more streamlined than any of its predecessors.
- C.O.R.™ Mount Technology positions the arrow at the center shot by design
- The rest is in line behind the riser eliminating quiver interference
- Secure & precise picatinny clamping system and three stainless steel ball bearings for maximum platform stability
- Configurable for top limb, bottom limb or cable-driven activation
- Eliminates lateral shaft movement with Zero Tolerance Technology (ZTT)
- Noise-eliminating elastomeric Rebound Dampener included (Patent Pending)
Breakdown
The Hamskea Epsilon Arrow Rest was developed to redefine the industry standard for an arrow rest with C.O.R.™ Mount Technology. The Epsilon Arrow Rest was designed to change the core of archery by making a center shot optimized rest and mounting system available to all. The rest can be mounted in line with the riser for a super low-profile fit. This smaller, lighter rest makes for a tighter fit relative to quiver clearance and centering mass. The Epsilon has new detent micro-click windage and elevation adjustments (.003” per click) providing ultimate precision in adjusting your rest. The over-molded containment bracket is a new two-piece system allowing for easy arrow loading. The over-molded steel core launcher has a new curved design for the ultimate fit and function. The Rebound Dampener System comes standard on the Epsilon Arrow Rest, helping to mitigate the shock that is transferred from the limb to the rest during the shot and preventing the wear that could eventually lead to failure. The Hamskea Epsilon Arrow Rest with Universal Bracket Kit creates the perfect mounting solution. In addition, there is a target conversion kit available to take your rest from hunting to the tournament trail.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 300 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
I am not really interested in selling bare bow only, but if you have an offer please send that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******