Loaded 2025 Mathews Lift XD Bow Package- Ambush- LiftXD -32" to 33.5" Draw Lngth
For more detailed photos and a full item description please click on the link provided below:
This bow was used VERY sparingly through this past archery season and has been well cared for in that time.
As those of you looking are no doubt aware, bows in this kind of draw length are extremely difficult to find. This is a true long draw bow, designed for shooters in the draw length range of 32 to 33.5 inches in length ONLY.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you if you would like more than just the bare bow.
Please just contact me to let me know what is of interest to you and I can get you pricing and availability of those items.
Bow Specifics:
- approximately 33" axle to axle
- 6.75" brace height
- up to 363 fps
- 4.31 lbs (bare bow only)
Here are the specifics:
-RIGHT Handed
-The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 32 through 33.5 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 50, 55, 60, 65, 70, or 75 pound max draw weights (The modules on the XD model draw 5 pounds under what is stamped on them- if you are not sure what this means please contact me so that I can explain this to you).
Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely).
I HAVE SEVERAL MODULE SETS IN STOCK.
Others can be ordered at your local dealer or purchased online. There are some here on eBay from other sellers.
ONE set of modules will be included with the sale.
The modules I currently have are SWX mods and all are in 85%.
They are as follows:
33.5" draw length in 70, 65, 60, 55, 50 lb
33" draw length in 70, 65, 60, 55 lb
32.5" draw length in 75, 70, 65, 55 lb
32" draw length in 70, 65, 55, 50 lb
Others can be ordered at your local dealer or purchased online. There are some here on eBay from other sellers.
ONE module set will be included and installed on the bow when sold.
-The limbs are in Factory Ambush Green finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Ambush Green finish.
-The string set is a custom set from Pure Perfextion that were installed when the bow was purchased new. They have not been shot much at all and are in fantastic condition. The set was over $200 installed and match the bow very well. I would rate them a 9+ of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-D loop is installed and ready to shoot.
-The rest is an integrated QAD Ultra Pro R2 Series series drop away in Black finish. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With this rest, you can draw the bow and let back down without the rest dropping away. This rest is one of the only rests that do this as most other models reset when the bow is drawn. The rest will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $215.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The sight is a Brand New Redline Torch Double Pin dovetail. Very nice all around sight with an original MSRP of $360!
Ignited from guts, passion, and sleepless nights - the Torch is a sight that can match your aggression in the woods ounce for ounce, yard by yard. We didn’t settle until every aspect of the sight was fit for any range, any scenario, and any hunt. The Torch Dovetail bow sight is compatible with the Mathew's Archery Bridge-Lock™. Whatever you throw at this sight, it will throw flawless performance back, just as we intended.
- USB Rechargeable Integrated 4 Stage Sight Light
- Right/Left Dual Yardage Tapes
- Brass Self-Lubricating Micro Windage Adjustment
- Dual Vertical Pins [0.019] & [Adjustable .010]
- Internal Metal Tape Yardage
- Dual Gear Driven, Ultra Smooth & Precise Wheel Driven Slider
- Quick Flip to Adjustable Hard Stop Sets on Wheel Slider for Quick Yardage Selection
- 1st, 2nd, and 3rd Axis Adjustments
- Bubble Level
- Fixed Bracket Sight Weight: 11 oz
- Dovetail Sight Weight: 13 oz
- Battery Life: 8 Hours Straight Run Time
- Recharge Time: 1 Hour
- Compatible with the Mathew's Archery Bridge-Lock™
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Redline 12" Bridge-Lock stabilizer in black finish. This installs into the Bridge-Lock area of the riser and offers a lot of adjustment so that you can customize it how it will best fit you. The stabilizer mounts to the Bridge-Lock area of the riser, allowing you to extend or shorten it as you see fit. Should you ever decide you need more or less weight, you can also purchase additional weights for the stabilizer or remove some of those currently installed.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 300 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
*****These arrows may not work for you if you are looking to set the bow at a longer length or heavier draw weight in the capable range of this bow*****
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Mathews Low Pro fixed position 6 arrow quiver in Ambush Green finish. This is the 6 arrow fixed position quiver. It is extremely secure when mounted to the riser, as well as light weight. The new Low Pro quivers sit extremely close to the bow to work in conjunction with the integrated and Bridge-Lock accessories.
MSRP on the quiver when new is $200.
I also have some other quivers that could be included with the bow. If you would prefer to have a different quiver, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
I am not really interested in selling bare bow only, but if you would like to make an offer you can message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******