Loaded 2025 Hoyt Alpha AX-2 32 Bow Package-70 lb Limbs- Bourbon - AX2 32
For more detailed photos and a full item description please click on the link provided below:
This bow was used though last archery season and has been well cared for in that time.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you.
Bow Specifics:
- approximately 32.5" axle to axle
- 336 fps ATA
- 6 11/16" brace height
- 75, 80 or 85% letoff
- 4.5 lbs (bare bow only)
Here are the Specifics
-RIGHT Handed
-The bow is set up with HBX Gen4 cams. With this cam, this bow can be set up anywhere from 26 through 31 inches in draw length in any 1/4 inch increment with the correct module set installed and set to the correct locations.
I HAVE ONLY THE #2, 3, and 4 MODULE SETs FOR THE BOW.
THIS MEANS I CAN SET THE BOW ANYWHERE FROM 27.25" to 30" inches in draw length ONLY.
ONE module set will be included with the purchase, and the bow set to the requested draw length prior to shipment.
-The riser of the bow is in the factory Bourbon finish.
-70 pound limbs in factory Bourbon finish.
-string stopper comes stock on the bow when new and is included here as well.
-The string is from GAS and was installed when the bow was new. The cables look to be the original set from Hoyt. They are in nice used condition. I would rate them an 8.5 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-D loop is installed and ready to shoot.
-The sight is a Brand New Trophy Ridge Fix-5 in black finish. Very nice sight. 5 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. Aluminum construction, 2nd axis leveling, onboard adjustment tool. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Hamskea Epsilon.
Those of you who know and have used Hamskea know of the great features and qualities of their rests.
Information from Hamskea:
The Epsilon Arrow Rest is the newest edition to the Hamskea Arrow Rest lineup. It is lighter and more streamlined than any of its predecessors.
- C.O.R.™ Mount Technology positions the arrow at the center shot by design
- The rest is in line behind the riser eliminating quiver interference
- Secure & precise picatinny clamping system and three stainless steel ball bearings for maximum platform stability
- Configurable for top limb, bottom limb or cable-driven activation
- Eliminates lateral shaft movement with Zero Tolerance Technology (ZTT)
- Noise-eliminating elastomeric Rebound Dampener included (Patent Pending)
Breakdown
The Hamskea Epsilon Arrow Rest was developed to redefine the industry standard for an arrow rest with C.O.R.™ Mount Technology. The Epsilon Arrow Rest was designed to change the core of archery by making a center shot optimized rest and mounting system available to all. The rest can be mounted in line with the riser for a super low-profile fit. This smaller, lighter rest makes for a tighter fit relative to quiver clearance and centering mass. The Epsilon has new detent micro-click windage and elevation adjustments (.003” per click) providing ultimate precision in adjusting your rest. The over-molded containment bracket is a new two-piece system allowing for easy arrow loading. The over-molded steel core launcher has a new curved design for the ultimate fit and function. The Rebound Dampener System comes standard on the Epsilon Arrow Rest, helping to mitigate the shock that is transferred from the limb to the rest during the shot and preventing the wear that could eventually lead to failure. The Hamskea Epsilon Arrow Rest with Universal Bracket Kit creates the perfect mounting solution. In addition, there is a target conversion kit available to take your rest from hunting to the tournament trail.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Hoyt Pro series 6 inch in black finish. This is a nice stabilizer in both look and function. The new design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability. Total current weight of the stabilizer is approximately 4 ounces and approximately 6 inches in length with all weights installed. These can be removed or added to if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
I am not really interested in selling bare bow only, but if you have an offer please send that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******