2025 Hoyt Carbon RX9 Ultra Bow -60 to 70 lb Limbs- Bourbon - RX-9 - Right Hand
For more detailed photos and a full item description please click on the link provided below:
This bow is part of some leftover shop inventory I purchased in from one of the shops I work with. It may have been shot a few times in shop, but the bow has never been sold nor warranty ever registered.
MSRP on bare bow alone was $2200 before you add a single accessory or any set up.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you.
Bow Specifics:
- approximately 30.5" axle to axle
- 340 fps ATA
- 6 3/8" brace height
- 75, 80 or 85% letoff
- 4.3 lbs (bare bow only)
Here are the specifics:
-RIGHT Handed
-The bow is set up with HBX Gen4 cams. With this cam, this bow can be set up anywhere from 26 through 31 inches in draw length in any 1/4 inch increment with the correct module set installed and set to the correct locations.
I HAVE ONLY THE #2, 3, 4 and 5 MODULE SETs FOR THE BOW.
THIS MEANS I CAN SET THE BOW ANYWHERE FROM 27.25" to 31" inches in draw length ONLY.
ONE module set will be included with the purchase, and the bow set to the requested draw length prior to shipment.
-The riser of the bow is in the factory Bourbon finish.
-70 pound limbs in factory Bourbon finish.
-string stopper comes stock on the bow when new and is included here as well.
-The string set is the original factory set from Hoyt. They have not been set up in any way.
-Hoyt owner's manual, Hoyt decals, Hoyt keychain, and Hoyt hat are included.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******