2025 Hoyt Alpha AX-2 32 Bow -70 lb Limbs- Wilderness Finish- AX2 32 - Right Hand
For more detailed photos and a full item description please click on the link provided below:
This bow is part of some leftover shop inventory I purchased in from one of the shops I work with. It may have been shot a few times in shop, but the bow has never been sold nor warranty ever registered.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you.
Bow Specifics:
- approximately 32.5" axle to axle
- 336 fps ATA
- 6 11/16" brace height
- 75, 80 or 85% letoff
- 4.5 lbs (bare bow only)
Here are the Specifics
-RIGHT Handed
-The bow is set up with HBX Gen4 cams. With this cam, this bow can be set up anywhere from 26 through 31 inches in draw length in any 1/4 inch increment with the correct module set installed and set to the correct locations.
I HAVE ONLY THE #2, 3, 4 and 5 MODULE SETs FOR THE BOW.
THIS MEANS I CAN SET THE BOW ANYWHERE FROM 27.25" to 31" inches in draw length ONLY.
ONE module set will be included with the purchase, and the bow set to the requested draw length prior to shipment.
-The riser of the bow is in the factory Wilderness finish.
-70 pound limbs in factory Wilderness finish. These will adjust from 58 pounds to just over 70 pounds safely.
-string stopper comes stock on the bow when new and is included here as well.
-The string set is the new original set from Hoyt. They have never set up in any way.
-Hoyt owner's manual, Hoyt decals, Hoyt keychain, and Hoyt hat are included.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******