Loaded Right Handed Hoyt Nitrum 30 Bow Package- 26 to 28", 60 to 70 Lb
For more detailed photos and a full item description please click on the link provided below:
This bow was used through 6 hunting seasons and has been well cared for in that time.
The limbs as well as string and cable set were just replaced.
This was over $400 in total cost, and is a great advantage over any other used bow you will find- especially at this kind of price.
Originally there would have been Limb Shox brackets installed between the limbs. Those have been removed and replaced with other dampers.
This is very common, and Hoyt no longer uses those Limb Shox brackets as they are not the most effective way to dampen noise and vibration of the bow with each shot.
If you would like a set of Limb Shox brackets I can order a set for you. They are not included here, and will be an additional $100 in cost if you would like a set.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
Bow Specifics:
- approximately 30" axle to axle
- 6.75" brace height
- 3.9 lbs (bare bow only)
- 332 fps IBO speed
- Z5 Cam and Half
Here are the specifics:
-Right Handed
-The bow is set up with Hoyt's Z5 cams- widely regarded as one of the smoothest drawing cam sets Hoyt has ever put out. The bow is currently set up at 27.5 inches in draw length. With this cam, this bow requires a different module set to change the draw length in each half inch increment length.
ONE module set of your choice will be included with the bow.
Upon purchase, you can let me know if you would like the bow set at 26, 26.5, 27, 27.5 or 28 inches in length ONLY.
Again, you may choose ONE module set to be installed on the bow prior to shipment at the listed price.
-The riser of the bow is in the factory Realtree Max-1 Camo finish.
-70 pound limbs in factory black finish. These limbs are brand new, just installed on the bow, which is a nearly $300 advantage/cost. They will adjust from 58 to just over 73 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-New string and cables were installed on the bow fewer than 50 shots ago. These are from VaporTrail, and were $150 in cost. The are in nice used condition. I would rate them an easy 9 of 10.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Redline RL2 tool-less adjust single pin sight in black finish. The pin is in .019 in size. This is a very nice sight that offers tool-less locking adjustment knobs, precise micro adjustment for windage, enclosed fiber optic ring, customizable/removable quick acquisition RI sight ring, adjustable yardage pointer, ultra smooth wheel adjustment, rugged non-slip track adjustment, bubble level, and adjustable 2nd and 3rd axis.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse FlexTorch 5.5" stabilizer in black finish. The stabilizer is approximately 4.4 ounces in weight.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
I am not really interested in selling bare bow only, but if you would like to make an offer that can be sent over for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******