Gorgeous, Loaded, Used Mathews 2024 Lift 33 Bow Package- Sitka Elevated II, EVII
For more detailed photos and a full item description please click on the link provided below:
This bow was used sparingly through this past archery season and has been well cared for in that time.
I will work with you on putting together a package that is of most interest to you if you would like more than just the bare bow.
Please just contact me to let me know what is of interest to you and I can get you pricing and availability of those items.
Bow Specifics:
- approximately 33" axle to axle
- 6.5" brace height
- up to 343 fps IBO
- 4.26 lbs (bare bow only)
Here are the specifics:
-RIGHT Handed
-The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 26 through 31.5 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 55, 60, 65, 70, 75 or 80 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely).
I HAVE SEVERAL MODULE SETS IN STOCK.
Others can be ordered at your local dealer or purchased online. There are some here on eBay from other sellers.
ONE set of modules will be included with the sale.
The others I currently have are all in 85% and are as follows:
31.5" draw length in 75, 70, 65, 60 lb
31" draw length in 70, 65 lb
30.5" draw length in 75, 70, 60 lb
30" draw length in 70 lb
29.5" draw length in 75, 70, 60, 55 lb
29" draw length in 75, 70, 60, 55 lb
28.5" draw length in 75, 70, 65, 60, 55 lb
28" draw length in 80, 70, 65 lb
27.5" draw length in 70, 60 lb
27" draw length in 70, 60 lb
26.5" draw length in 70 lb
26" draw length in 60 lb
Others can be ordered at your local dealer or purchased online. There are some here on eBay from other sellers.
ONE module set will be included and installed on the bow when sold.
-The limbs are in Factory Sitka Elevated II finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Sitka Elevated II finish.
-The new Engage grip from Mathews is a fantastic improvement over those grips prior to it.
-This bow does have the ability to have the Shot Sense system installed in the grip (the Shot Sense is not included with any bow and must be purchased separately).
-The string set is the original factory set of Match strings from Mathews. They are in very nice used condition, and I would rate them a 9 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The rest is a Hamskea Hybrid Hunter Pro with Micro-Tune.
Those of you who know of Hamskea know of all of the benefits they provide.
MSRP on the rest is $200 when new.
Here is the information from Hamskea:
Our Hybrid Pro Series arrow rest provides proven accuracy and durability in a light weight package for all bowhunting applications.
- • Takes design elements from the proven VersaRest™ platform in a more streamline package that is 20% lighter
- • Full microtune windage and vertical adjustments
- • Zero Tolerance Technology™ ensures there is no lateral play in the shaft and rotation is silky smooth
- • Overmold containment bracket with 3/4 load gate ensures quiet and efficient arrow loading
- • Launcher features a proprietary coating to minimize sound and eliminate the need to apply felt
- • Launcher shaft rides on dual over-sized sealed stainless steel ball bearings that rotate smoothly shot after shot
- • Zero Stop Technology™ ensures repeatable up and down launcher positions
- • Spring knob provides multiple internal torsion spring adjustment positions
- • 8 sided, non-slip compression clamp design with in-line dampening coil eliminates launcher bounce-back
- • Universal non-slip limb pad, heavy duty no-stretch cord and easy adjustment cord clamp
- • Universal Limb Clamp assembly can be configured multiple ways: top or bottom limb actuated, cable actuated or cable fall away
- • Factory configured as a limb activated rest
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Mathews Harmonic Dampener in the sight to match the bow and to even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Redline 12" Bridge-Lock stabilizer. This installs into the Bridge-Lock area of the riser and offers a lot of adjustment so that you can customize it how it will best fit you. The stabilizer mounts to the Bridge-Lock area of the riser, allowing you to extend or shorten it as you see fit. Should you ever decide you need more or less weight, you can also purchase additional weights for the stabilizer or remove some of those currently installed.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Mathews Quick Detaching HD 6 arrow quiver in Sitka Elevated II finish. This is the 6 arrow detachable quiver, so detaches very quietly and quickly with only a quarter of a turn of the quiver. It is extremely secure when mounted should you wish to shoot with the quiver in place, as the claw bracket holds the quiver very firmly and has its own dampers in bracket and quiver to help reduce noise and vibration when shooting.
MSRP on the quiver when new is $170.
I also have some other quivers that could be included with the bow. If you would prefer to have a different quiver, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
The stabilizer and quiver will likely need to be removed so that it can be more safely packaged for shipment.
It is very simple to reinstall, and these are meant to be detached in this way.
I am not really interested in selling bare bow only, but if you would like to make an offer on the bare bow you can message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******