Gorgeous, Loaded, Used Mathews 2024 Lift 33 Bow Package- Ambush Green Finish
For more detailed photos and a full item description please click on the link provided below:
This bow was used through this past archery season and has been well cared for in that time. It is loaded with great accessories.
I will work with you on putting together a package that is of most interest to you if you would like more than just the bare bow.
Please just contact me to let me know what is of interest to you and I can get you pricing and availability of those items.
Bow Specifics:
- approximately 33" axle to axle
- 6.5" brace height
- up to 343 fps IBO
- 4.26 lbs (bare bow only)
Here are the specifics:
-RIGHT Handed
-The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 26 through 31.5 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 55, 60, 65, 70, 75 or 80 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely).
I HAVE SEVERAL MODULE SETS IN STOCK.
Others can be ordered at your local dealer or purchased online. There are some here on eBay from other sellers.
ONE set of modules will be included with the sale.
The others I currently have are all in 85% and are as follows:
31.5" draw length in 75, 70, 65, 60 lb
31" draw length in 70, 65 lb
30.5" draw length in 75, 70, 60 lb
30" draw length in 70 lb
29.5" draw length in 75, 70, 60, 55 lb
29" draw length in 75, 70, 60, 55 lb
28.5" draw length in 75, 70, 65, 60, 55 lb
28" draw length in 80, 70, 65 lb
27.5" draw length in 70, 60 lb
27" draw length in 70, 60 lb
26.5" draw length in 70 lb
26" draw length in 60 lb
Others can be ordered at your local dealer or purchased online. There are some here on eBay from other sellers.
ONE module set will be included and installed on the bow when sold.
-The limbs are in Factory Ambush finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Ambush finish.
-The new Engage grip from Mathews is a fantastic improvement over those grips prior to it, and this bow goes even one step further with the Engage Side Plates installed. This helps to further reduce torque and increase accuracy down range.
-This bow does have the ability to have the Shot Sense system installed in the grip (the Shot Sense is not included with any bow and must be purchased separately).
-The string set is the original factory set of Match strings from Mathews. They are in very nice used condition, and I would rate them an 8.5 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The rest is a Hamskea Epsilon Mathews bracket edition.
Those of you who know of Hamskea know of all of the benefits they provide.
MSRP on the rest is $275 when new.
Here is the information from Hamskea:
The Epsilon™ Arrow Rest was developed to redefine the industry standard for an arrow rest with C.O.R.™ Mount Technology.
Features:
- C.O.R.™ Mount Technology that positions the arrow at center shot by design
- One of Hamskea’s most compact platforms to date
- The rest is in-line behind the riser eliminating quiver interference
- Detent micro-tune for additional windage and vertical adjustments
- Uber secure & precise picatinny clamping system
- Configurable for top limb, bottom limb or cable driven activation
- Eliminates lateral shaft movement with Zero Tolerance Technology (ZTT)
- Three stainless steel ball bearings for maximum platform stability
- Noise eliminating elastomeric Rebound Dampener (Patent Pending)
- Cord Clamp Tensioner
- Launcher torsion spring and launcher angle adjustment
- Delta V Arrow Guide and Riser Mounted Arrow Guide included
- Customized engraving available
The Epsilon™ Arrow Rest was designed to change the core of archery by making a center shot optimized rest and mounting system available to all. The rest can be mounted in-line with the riser for a super low-profile fit. This smaller, lighter rest makes for a tighter fit relative to quiver clearance and centering mass. The Epsilon™ has new detent micro-click windage and elevation adjustments (.003” per click) providing ultimate precision in adjusting your rest. The over-molded containment bracket is a new two-piece system allowing for easy arrow loading. The over-molded steel core launcher has a new curved design for the ultimate fit and function. The Rebound Dampener System comes standard on the Epsilon™, helping to mitigate the shock that is transferred from the limb to the rest during the shot and prevents the wear that could eventually lead to failure. The Epsilon™ Arrow Rest will come with either the Universal L-Bracket or the Mathews Approved C.O.R. Mount Bracket, creating the perfect mounting solution – no matter what bow you are shooting. In addition, there is a target conversion kit available to take your rest from hunting afield to the tournament trail.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The sight is a Brand New Redline RL2 DTM that is installed in the bridge-lock area of the riser (though the mount for the outside of the riser is also included).
This sight offers 1st, 2nd and 3rd axis adjustments - which not many sights do.
There are a full set of sight tapes included with the sight as well as a sight light. The light shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Axion GLZ 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Mathews Low Pro fixed position 6 arrow quiver in Black finish. This is the 6 arrow fixed quiver, so is not detachable. It is extremely secure, since mounted permanently to the bow. The new Low Pro quivers sit extremely close to the bow to work in conjunction with the integrated and Bridge-Lock accessories.
MSRP on the quiver when new is $200.
I also have some other quivers that could be included with the bow. If you would prefer to have a different quiver, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-Mathews SCS brackets are installed on the bow- a $70 advantage.
The sight may be removed so that it can be more safely packaged for shipment.
It is very simple to reinstall, and is meant to be detached in this way.
I am not really interested in selling bare bow only, but if you would like to make an offer on the bare bow you can message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******