Loaded, Used Mathews 2024 Lift 29.5 Bow Package - Mossy Oak Bottomland
For more detailed photos and a full item description please click on the link provided below:
This bow was used through this past archery season and has been well cared for in that time.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you if you would like more than just the bare bow.
Please just contact me to let me know what is of interest to you and I can get you pricing and availability of those items.
Bow Specifics:
- approximately 29.5" axle to axle
- 6" brace height
- up to 348 fps IBO
- 3.99 lbs (bare bow only)
Here are the specifics:
-RIGHT Handed
-Currently the bow is set up with 27.5" modules in 85% letoff, 70 pound.
The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 24.5 through 30 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 55, 60, 65, 70, 75 or 80 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so for example the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely, etc).
All other modules that I currently have in stock are as follows:
30" draw length in 75, 70, 65, 60 lb
29.5" draw length in 70, 65 lb
29" draw length in 75, 70, 60 lb
28.5" draw length in 60, 70 lb
28" draw length in 75, 70, 60 lb
27.5" draw length in 75, 70, 60, 55 lb
27" draw length in 75, 70, 60 55 lb
26.5" draw length in 80, 70, 65 lb
26" draw length in 60, 70 lb
25.5" draw length in 70, 60 lb
25" draw length in 70 lb
24.5" draw length in 60 lb
Others can be ordered at your local dealer or purchased online. There are some here on eBay from other sellers.
ONE set of modules will be included with the sale.
-The limbs are in Factory Mossy Oak Bottomland finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Mossy Oak Bottomland finish.
-This bow does have the ability to have the Shot Sense system installed in the grip (the Shot Sense is not included with any bow and must be purchased separately).
-The string set is the original from Mathews, custom ordered in the flo green color you see in the photos.
This year the string sets are now the new MATCH bowstrings from Mathews.
They are in very nice condition, and I would rate them a 9 of 10 in condition after the nearly one year of use.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The rest is a Brand New QAD Integrated R2 Pro Series series drop away in black. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $205.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The sight is an Exact B3 Hunter with Bridge-Lock bar. Very nice sight. 4 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. 3 Axis adjustments, only 4 ounces in weight, 5 locations on the sight bar for adjustment, and more. There is also a rheostat blue light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
MSRP on the sight is $150.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Redline 12" Bridge-Lock stabilizer. The stabilizer mounts to the Bridge-Lock area of the riser and has a ton of adjustment, allowing you to extend or shorten it as you see fit. Should you ever decide you need more or less weight, you can also purchase additional weights for the stabilizer or remove some of those currently installed.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Mathews Low Pro quick detaching 5 arrow quiver in matching Mossy Oak Bottomland finish. This is the arrow detachable quiver, so is easily and quickly detached from the bow should you choose not to shoot with the quiver on. It latches very securely into place should you instead choose to shoot with the quiver on the bow. The new Low Pro quivers sit extremely close to the bow to work in conjunction with the integrated and Bridge-Lock accessories.
MSRP on the quiver when new is $250.
I also have some other quivers that could be included with the bow. If you would prefer to have a different quiver, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
I am not really interested in selling bare bow only, but if you would like to make an offer you can message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******