- Storefront
- >
- All Right Handed 70 Pound Bow Packages (often multiple pages)
- >
- Mathews Right Hand 70 Pound Bow Packages
- >
- Mathews Creed Bow Package- 29" Draw, 60/70 lb - Lost Camo- Very Nice Condition
Mathews Creed Bow Package- 29" Draw, 60/70 lb - Lost Camo- Very Nice Condition
For more detailed photos and a full item description please click on the link provided below:
This bow has been used since new by the original owner.
It has been well cared for and is in very nice used condition
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you should you wish to add anything to the bow. All available items are listed here.
Bow Specifics:
- approximately 30" axle to axle
- 7" brace height
- 3.85 lbs (bare bow only)
- up to 328 fps IBO
Here are the specifics:
-Right Handed
-Currently the bow is set up with a 29 inch cam. The draw length can only be changed by changing the cam installed on the bow.
I have no other cams at all for this bow.
It will be sold as it currently sits- with the 29 inch cam installed.
With the correct cam installed the bow can be set up anywhere from 26 to 30 inches in any half inch increment.
Again though, I have no other cams so will be including the current 29 inch cam ONLY.
-70 pound limbs in factory Mathews Lost Camo finish. The limbs currently top out on my scale at just over 73 pounds and can be set as low as 58 safely.
-The riser of the bow is in factory Mathews Lost Camo finish.
-The string and cable are in good used condition. They have been on the bow for about a year now and are a custom set that were over $150 installed. I would rate them an 8 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Mathews Harmonic Dampener in the sight to match the bow and to even further reduce any noise and vibration
-The stabilizer is an Axion 5 inch in Mathews Lost Camo finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
-The rest is a QAD Ultra HDX Pro Series series drop away in matching Mathews Lost Camo finish. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest is $180.
-Also included is a quick detaching Fuse Maxxis 4 arrow quiver in camo finish (this is realtree camo, but as you can see in the photos does not look bad at all with this bow package). This is a nice quiver in both look and function. The quiver now mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the riser of the bow. When detached, all that remains is the very small, light-weight bracket on the top of the riser of the bow. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
I am not really interested in selling bare bow only, but if you would like to make an offer on the bare bow please message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******