Custom Mathews Reezen 6.5 Bow Package- 30" Draw, 50 to 60 lb - Lost Camo w/Case
For more detailed photos and a full item description please click on the link provided below:
This is a one owner bow that has been hunted since new. It has been well cared for, and it has some nice custom touches you will not see on other bows.
The roller guide, string stop bracket, string suppressor fingers, and the HHA sight have been custom dipped in Mathews Lost Camo to match the rest of the bow.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you should you wish to add anything to the bow. All available items are listed here.
Bow Specifics:
- approximately 32" axle to axle
- 6.5" brace height
- 4.15 lbs (bare bow only)
- up to 340 fps IBO
Here are the specifics:
-Right Handed
-Currently the bow is set up with a 30 inch cam. The draw length can only be changed by changing the cam installed on the bow.
I have no other cams at all for this bow.
It will be sold as it currently sits- with the 30 inch cam installed.
With the correct cam installed the bow can be set up anywhere from 24 to 30 inches in any half inch increment.
Again though, I have no other cams so will be including the current 30 inch cam ONLY.
-60 pound limbs in factory Mathews Lost Camo finish. The limbs currently top out on my scale at just over 62 pounds and can be set as low as 48 safely.
-The riser of the bow is in factory Mathews Lost Camo finish.
There is a bit of wear to the grip area of the riser, but it is not much and effects nothing at all.
-There is a custom Dead End String Stop added to the bow. There was no string stop included with this model, but the owner added this Dead End string stop from Mathews, and also had the bracket custom dipped in Lost Camo to match the rest of the bow.
-The string and cable are in very good used condition as they were installed just a few months ago. They are a custom set that were over $150 installed. I would rate them a 9 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is an HHA single pin. It is a fixed single pin. I am not sure of the model. It has been custom dipped to match the rest of the bow.
-The stabilizer is a Doinker in Lost camo finish. It is approximately 4.25" in length.
-The rest is a Trophy Taker drop away. It is all set up, timed and ready to shoot.
-The case is a Black's Creek case with the Mathews and Reezen names on it as can be seen in the photos.
This is a semirigid case that was always one of my favorite of all time. I really wish it was still made.
There is an arrow pouch as well as two additional accessory pouches in the case- those accessory pouches attach via velcro and can be moved around or removed entirely from the case.
Just a great all around case, and matches the bow in every way.
I am not really interested in selling bare bow only, but if you would like to make an offer on the bare bow please message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******