Cam Hanes Special Edition Hoyt Carbon RX-8 Bow Package- RedWrx RX8 -70 to 80 lb
For more detailed photos and a full item description please click on the link provided below:
This bow was used through this past season.
As most of you know, bows in 80 pound draw weight are very difficult to find, especially when in a special edition combo like this Cam Hanes bow.
MSRP on bare bow alone is $2200 before you add a single accessory, any set up or the custom set of GAS strings.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you.
Bow Specifics:
- approximately 30 9/16" axle to axle
- 342 fps ATA
- 6 1/8" brace height
- 75, 80 or 85% letoff
- 4 lbs (bare bow only)
Here are the specifics:
-RIGHT Handed
-The bow is set up with 2024 HBX Xact cams. The bow is currently set up at 29 inches in draw length. With the new cam, this bow can be set up anywhere from 25 through 30 inches in draw length with the correct module set installed and set to the correct locations.
THE CURRENT MODULES ARE #3 MODS- WHICH WILL ADJUST FROM 28.25 TO 30 INCHES IN ANY QUARTER INCH INCREMENT.
To adjust to any other length, you will need a different module set.
I have only one other module set in stock, the #2 mod set. This will adjust from 26.25" to 28 inches in any quarter inch increment.
This means that I can adjust this bow from 26.25 through 30 inches for you prior to shipment.
ONE module set will be included with the purchase.
Please just let me know at what draw length between the stated 26.25 and 30 inch draw length range you would like for the bow to be set.
-The riser of the bow is in the factory Origin Raptor finish- a new finish for 2024 and a very popular one.
-80 pound limbs in factory Cam Hanes Signature series finish- a custom combo carrying a $100 upcharge at the time of purchase.
The limbs will adjust from 68 to just over 80 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string set is a custom set from GAS that were over $200 installed. They are in very nice used condition, and I would rate them a 9 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Redline RL3 tool-less, micro adjust 5 pin sight in black finish. All pins are .019 in size. This is a very nice sight that offers tool-less locking adjustment knobs, precise micro adjustment for windage and elevation, enclosed fiber optic ring, 3 mounting points, bubble level, quick acquisition RI sight ring, and adjustable 1st and 2nd axis.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in black finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The rest is a Hoyt model Integrated IMX Pro Series series drop away in black. This integrates to the dovetail mount on the back of the riser and as you can see carries the Hoyt name and logo. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With this rest, you can draw the bow and let back down without the rest dropping away. This rest is one of the only rests that do this as most other models reset when the bow is drawn. This rest will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through Hoyt and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $290.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Easton Axis 300 spine will be included with the purchase.
Aluminum HIT inserts will be installed.
-Also included is a Brand New detachable one piece Hoyt Superlite 4 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting bracket that installs to the top of the riser of the bow. It is held in place using the wing screw- very quiet, simple and secure. When detached, all that remains is the very small, light-weight bracket on the top of your riser. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
MSRP on the quiver when new was $210.
-New Hoyt RedWrx hat is included.
I am not really interested in selling bare bow only, but if you have an offer please send that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******