- Storefront
- >
- Right Handed 65 Pound Bow Packages
- >
- Gorgeous Mathews Z7 Magnum Bow- 29" Draw and 55/65 lb- Right Handed
Gorgeous Mathews Z7 Magnum Bow- 29" Draw and 55/65 lb- Right Handed
For more detailed photos and a full item description please click on the link provided below:
This bow is in as nice of shape as I have seen this model in years.
It has been extremely well cared for, and shot indoor only.
This is a one owner bow.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you should you wish to add anything to the bow. All available items are listed here on eBay and can be seen in my eBay Storefront.
Please see the photos as they speak for themselves.
Bow Specifics:
- approximately 32" axle to axle
- 6.375" brace height
- up to 340 fps IBO
- 4.25 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow was is currently set up with a 29 inch cam.
The draw length can only be changed by changing the cam on the bow.
This bow can be set up anywhere from 24 through 30 inches in draw length when the correct cam is installed.
I HAVE NO OTHER CAMS FOR THIS BOW.
It will be sold with the current 29 inch cam only.
Other cams are available online or through any Mathews dealer, but again are not included here and I do not have any others to offer.
-65 pound limbs in factory Lost Camo finish. The limbs are currently topping out at just under 65 pounds on my scale and can be set as low as 53 pounds (though the peak weight may change with a change in draw length).
-The riser of the bow is in factory Mathews Lost Camo finish.
-The string and cable are in very good used condition. They are a custom set that I was told were installed about 6 months ago.
I am not sure of the maker of the string set.
I would rate it an 8 of 10 in condition.
-The rest is a RipCord Drop away.
-The sight is a Black Gold Rush 4 pin.
-The stabilizer is a Stokerized in matching red and Lost Camo.
The sight will likely be removed to safely, properly package the bow for shipment.
It is reinstalled simply with just an allen wrench.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******