Custom, Loaded Mathews VXR 28 Bow Package- Many Draw Lengths/Weights-Camo/Ambush
For more detailed photos of this bow, please click on the link provided below:
This bow has been used through three archery seasons and has been very well cared for in that time.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
Bow Specifics:
- approximately 28" axle to axle
- 6" brace height
- up to 344 fps IBO
- 4.44 lbs (bare bow only)
Detailed Item Description
-Right Handed
-Currently the bow is set up with 28 inch, 85% letoff, 60 pound modules (actually topping out at just over 62 pounds on my scale).
The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 25.5 through 30 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 60, 65, 70 or 75 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely).
I have modules in 85% in stock to set this bow at the following:
In 75 pound:
30, 29.5, 29, 28.5, 28, 27.5, 27, 26.5
In 70 pound:
30, 29.5, 29, 28.5, 28, 27.5, 27, 26.5, 26, 25.5
In 65 pound:
30, 29.5, 29, 28.5, 28, 27.5, 27, 26.5, 25.5
In 60 pound:
30, 29.5, 29, 28.5, 28, 27.5, 27, 26.5, 26, 25.5
I have just a few in 80%. Please inquire about what may be in stock on those prior to any purchase to confirm.
ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price.
If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the module sets listed above will be installed and included.
-The limbs are in factory Ambush Green finish, and were just installed. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
-The riser of the bow is in factory Realtree Camo finish.
-The new Engage grip from Mathews is fantastic, and a great improvement over an already great grip in the previous models.
-The string and cables are in nice used condition. They are the original factory set of Zebra Trophy from Mathews. They are in very nice used condition, and I would rate them an 8.5 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight will be a new Trophy Ridge React 5 pin in camo finish.
-The stabilizer is a Brand New Axion GLZ 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The rest will be a QAD HDX Pro in black finish.
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in camo finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******