LEFT Handed Hoyt Carbon RX-8 Ultra Bow Package- RedWrx RX8 -60/70 lb - Tombstone
For more detailed photos and a full item description please click on the link provided below:
MSRP on bare bow alone is $2150 before you add a single accessory or any set up.
This bow was used through two seasons.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you.
Bow Specifics:
- approximately 34.6880" axle to axle
- 332 fps ATA
- 7 1/16" brace height
- 75, 80 or 85% letoff
- 4.4 lbs (bare bow only)
Here are the specifics:
-LEFT Handed
-The bow is set up with HBX Xact cams. The bow is currently set up at 29 inches in draw length. With the new cam, this bow can be set up anywhere from 27 through 32 inches in draw length with the correct module set installed and set to the correct locations.
There are three different module sets to achieve this full range of draw length.
I have only the #2 and #3 module sets in stock.
This means I can set the bow up anywhere from 28.25 through 32 inches in draw length.
ONE module set will be included with the purchase.
Please just let me know at what draw length between the stated 28.25 and 32 inch draw length range you would like for the bow to be set.
-The riser of the bow is in factory Tombstone finish.
-70 pound limbs in factory Tombstone.
The limbs will adjust from 58 to just over 60 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string set is a custom set from JBK that were $200 installed. They are in good used condition, and I would rate them an 8 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Trophy Ridge Fix-5 in black finish. Very nice sight. 5 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. Aluminum construction, 2nd axis leveling, onboard adjustment tool. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in grey finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The rest is a Brand New QAD Ultra HDX Pro Series series drop away in black. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $160.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a used two piece Hoyt Superlite 4 arrow quiver in Tombstone finish. This is a very nice quiver in both look and function. It mounts securely to the the riser of the bow itself on both the top and bottom peices. There is a lot of adjustment in the top portion of this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. The quiver has been on the bow since new, so does have some cosmetic scuffs and slight finish loss in some areas.
MSRP on the quiver when new was $250.
If you are looking for something different in a quiver please just let me know as I have many others around, and I can let you know if I have what you are looking for in stock. Please inquire about any changes BEFORE you make the purchase though as any changes will change the price of the package as well.
I am not really interested in selling bare bow only, but if you have an offer please send that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******