Mathews Halon X Bow Package - 50/60 lb- Right Handed- Black- Currently 29" Draw
For more detailed photos and a full item description please click on the link provided below:
This bow was used through five indoor seasons and is in nice used condition.
There was some wear that the original owner covered up with some paint.
I have tried to show those clearly in the photos.
Original MSRP on this bow was $1300 on the bare bow alone.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you should you wish to add anything to the bow.
Bow Specifics:
- approximately 35" axle to axle
- 7" brace height
- up to 330 fps IBO
- 4.94 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow was is currently set up with 29 inch, 85% letoff modules. The draw length can only be changed by changing the mods on the bow.
This bow can be set up anywhere from 26 through 30.5 inches in draw length when the correct draw modules are installed, and modules are available in 85% as well as 75% letoffs.
I DO NOT HAVE ANY OTHER MODULES FOR THIS BOW.
It will be sold with the current 29 inch 85% modules only.
Other modules are available online or through any Mathews dealer, but again are not included here and I do not have any others to offer.
-60 pound limbs in factory Black finish. The limbs are currently topping out at just over 64 pounds on my scale and can be set as low as 48 pounds (though the peak weight may change with a change in draw length).
-The riser of the bow is in factory Black finish.
-The string and cable are in very good used condition. They are a custom set of ABB (America's Best Bowstrings) that were nearly $200 installed. They are less than a year old. I would rate a 9 of 10.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Mathews Harmonic Dampener in the sight to match the bow and to even further reduce any noise and vibration.
I have some other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Axion GLZ 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
I have some other stabilizers as well if you are looking for something different. If you would prefer any other stabilizer than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-Also included is a Brand New quick detaching Redline RL3 quick detaching 5 arrow quiver. This quiver is 15.5" in length and 8.9 ounces in weight. It quickly and easily detaches by loosing the locking knob and sliding the quiver from its bracket. There is a treestand loop should you choose the remove and hang the quiver while on stand and foam in the hood along with the two arrow grippers help to keep your arrows secure.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******