Hoyt Carbon RX-8 Bow - RedWrx RX8 -60/70 lb- in Sitka Elevated II -EV2
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1950 before the custom string color upgrade, tax or a single accessory was added!!
This bow is new.
It has never been set up, shot, nor used in any way.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you.
Bow Specifics:
- approximately 30 9/16" axle to axle
- 342 fps ATA
- 6 1/8" brace height
- 75, 80 or 85% letoff
- 4 lbs (bare bow only)
Here are the specifics:
-RIGHT Handed
-The bow is set up with 2024 HBX Xact cams. The bow is currently set up at 26 inches in draw length. With the new cam, this bow can be set up anywhere from 25 through 30 inches in draw length with the correct module set installed and set to the correct locations.
THE CURRENT MODULES ARE #1 MODS- WHICH WILL ADJUST FROM 25 TO 26 INCHES IN ANY QUARTER INCH INCREMENT.
To adjust to any other length, you will need a different module set.
They are not included, and I do not have them in stock.
-The riser of the bow is in the factory Sitka Elevated II finish.
-70 pound limbs in factory Elevated II finish. They will adjust from 58 to just over 72 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string set is the new factory set of Fuse from Hoyt. They have never been set up nor used in any way.
-Hoyt owner's manual, Hoyt decals, Hoyt keychain, and Hoyt hat are included.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******