- Storefront
- >
- All Right Handed 70 Pound Bow Packages (often multiple pages)
- >
- Mathews Right Hand 70 Pound Bow Packages
- >
- Mathews 2024 Lift 33 Bow - Black - w/Mathews Hamskea Everest Rest and SCS
Mathews 2024 Lift 33 Bow - Black - w/Mathews Hamskea Everest Rest and SCS
For more detailed photos and a full item description please click on the link provided below:
This bow was ordered in for a customer, a new set of GAS strings along with the rest and SCS brackets were installed, and they have now decided that they cannot complete the purchase.
The bow is listed as 'New Other' as it has never left the shop, but has been pressed to install the new string set and does have both SCS brackets and a rest now installed.
As those of you who have ordered, or are thinking about ordering, a new Lift have likely been told, currently most shops are getting estimated ship dates of late August on new orders.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you if you would like more than just the bare bow.
Please just contact me to let me know what is of interest to you and I can get you pricing and availability of those items.
Bow Specifics:
- approximately 33" axle to axle
- 6.5" brace height
- up to 343 fps IBO
- 4.26 lbs (bare bow only)
Here are the specifics:
-RIGHT Handed
-Currently the bow is set up with F modules in 85% letoff, 70 pound.
This places the draw length at 29 inches.
The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 26 through 31.5 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 55, 60, 65, 70, 75 or 80 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so for example the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely, etc).
I HAVE ONLY A FEW OTHER MODULE SETS IN STOCK.
Others can be ordered at your local dealer or purchased online. There are some here on eBay from other sellers.
ONE set of modules will be included with the sale.
The others I currently have are all in 85% and are as follows:
A/70 pound = 31.5" draw length
B/70 pound = 31" draw length
C/70 pound = 30" draw length
D/70 pound = 30" draw length
F/70 pound = 29" draw length
F/80 pound = 29" draw length
G/70 pound = 28.5" draw length
H/70 pound = 28" draw length
-The limbs are in Factory Black. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Black.
-The new Engage grip from Mathews is a fantastic improvement over those grips prior to it.
-This bow does have the ability to have the Shot Sense system installed in the grip (the Shot Sense is not included with any bow and must be purchased separately).
-The string set is a custom set from GAS.
They were nearly $200 installed, so a very nice value.
-No peep sight is installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot at no additional cost to you.
-No d loop has yet been installed on the string. If you would like me to install a loop prior to shipping, I can do that for you at no additional cost.
-The rest is a Mathews Approved Everest Series Hamskea drop away in black (the newest of rests released by Hamskea). Those of you who know Hamskea know of the great quality, features and warranty that they back their product with.
This has not had the arrow launcher felt or arrow shelf pad installed yet, but they are in the package and included should you wish to use them.
MSRP on the rest when new is $200.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******