Hoyt Carbon Matrix Bow Package #2 cam- 60/70 lb- 27 to 29"- Camo- Set at 28.5"
For more detailed photos and a full item description please click on the link provided below:
This is a one owner bow that has been well cared for.
- approximately 35" axle to axle
- 7.255" brace height
- Only 3.8 lbs (bare bow only)
Here are the specifics:
-The bow is set up with #2 Fuel cams. The bow is currently set up at 28.5 inches in draw length. With the #2 Fuel cams, this bow is able to be set at 27 through 29 inches in half inch increments ONLY. This is done by installing the appropriate module set on the bow.
I currently have modules in stock in 28 or 28.5 inches ONLY.
ONE module set will be included with your purchase.
Please just let me know which module set you will need installed upon making your purchase and I will be sure that is done prior to shipment.
-The riser of the bow is in the factory Realtree camo finish.
-70 pound limbs in factory Realtree camo finish are installed on the bow. They will adjust from 58 to just over 71 pounds on average when timed and tuned correctly. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string set is a custom set from Winner's Choice that were over $150 installed. I would rate them an 8.5 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot at no additional cost to you.
-String loop is installed and ready to shoot at no additional cost to you.
-The sight is a Brand New Copper John Mark III 5 pin in camo finish. This sight offers Copper John's speed gap tech for zero pin gap, iron clad fibers to prevent against breakage, ultra bright microDot tech resulting in brighter pins, glow in the dark level, and integrated 3rd axis. All 5 pins are in .019 size. There is also an AfterBurner blue light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New Trophy Ridge Level series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. This has Trophy Ridge's exclusive Vertical Drop Technology for un-matched arrow clearance. 100% arrow containment, and solid 6061 Aluminum construction.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in Realtree camo and black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 400, 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Also included is a quick detaching Fuse 4 arrow quiver in camo finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
If you would be interested in the bare bow only, I would sell the bow bare at a price of $550. This does not include shipping nor any applicable taxes (tax applies if in PA only).
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******