- Storefront
- >
- All Right Handed 70 Pound Bow Packages (often multiple pages)
- >
- Mathews Right Hand 70 Pound Bow Packages
- >
- Used Mathews 2024 Lift 29.5 Bow - Mossy Oak Bottomland w/Mathews Hamskea Epsilon
Used Mathews 2024 Lift 29.5 Bow - Mossy Oak Bottomland w/Mathews Hamskea Epsilon
For more detailed photos and a full item description please click on the link provided below:
This bow was used for around a month now, with not many arrows at all through it.
The owner purchased both this 29.5 and a 33, and now that his 33 is in he is going with that one.
As those of you who have ordered, or are thinking about ordering, a new Lift has an extremely long wait time, especially in this finish.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you if you would like more than just the bare bow.
Please just contact me to let me know what is of interest to you and I can get you pricing and availability of those items.
Bow Specifics:
- approximately 29.5" axle to axle
- 6" brace height
- up to 348 fps IBO
- 3.99 lbs (bare bow only)
Here are the specifics:
-RIGHT Handed
-Currently the bow is set up with F modules in 85% letoff, 70 pound.
This places the draw length at 27.5 inches.
The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 24.5 through 30 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 55, 60, 65, 70, 75 or 80 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so for example the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely, etc).
I HAVE ONLY A FEW OTHER MODULE SETS IN STOCK.
Others can be ordered at your local dealer or purchased online. There are some here on eBay from other sellers.
ONE set of modules will be included with the sale.
The others I currently have are all in 85% and are as follows:
A/70 pound = 30" draw length
B/70 pound = 29.5" draw length
D/70 pound = 28.5" draw length
E/70 pound = 28" draw length
F/70 pound = 27.5" draw length
G/70 pound = 27" draw length
H/70 pound = 26.5" draw length
-The limbs are in Factory Mossy Oak Bottomland finish- a new one from Mathews for 2024. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Bottomland finish- again a new one from Mathews for 2024.
-The new Engage grip from Mathews is a fantastic improvement over those grips prior to it.
-This bow does have the ability to have the Shot Sense system installed in the grip (the Shot Sense is not included with any bow and must be purchased separately).
-The string set is the original from Mathews.
This year the string sets are now the new MATCH bowstrings from Mathews.
They are in nice condition as they have not been shot much.
-No peep sight is installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot at no additional cost to you.
-String loop is installed and ready to shoot.
-The rest is a Mathews Approved Epsilon Series Hamskea drop away in black. Those of you who know Hamskea know of the great quality, features and warranty that they back their product with.
This has not had the arrow launcher felt or arrow shelf pad installed yet, but they are in the package and included should you wish to use them.
MSRP on the rest when new is $275.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Harmonic Dampener in the sight to match the bow and to even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Axion GLZ 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Mathews Hat, Mathews Owner's Manual, and Mathews decals are included.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******