Loaded Hoyt Helix Bow Package #3 cam- 60 to 70 lb- 27 to 30"- Camo and Black
For more detailed photos and a full item description please click on the link provided below:
This bow is in very nice used condition.
There was a small splinter on one of the limbs, so I have replaced the limb set with a new set from Hoyt- new limbs being over a $300 value.
It is all retimed and ready to go!
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
Bow Specifics:
- 30.5" axle to axle
- 342 fps ATA
- 6" brace height
- 4.3 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow is set up with #3 ZT cams. The bow is currently set up at 28 inches in draw length. With the #3 ZT cams, this bow is able to be set at 27 through 30 inches in half inch increments ONLY.
Please just let me know where you would like it to be set and I can be sure to do that for you prior to shipment.
-The riser of the bow is in the factory Realtree Edge Camo finish.
-Brand New 70 pound limbs in factory black finish were just installed. They will adjust from 58 to 72 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
There is a small piece broken off of the side. This has no effect on the bow or function of the string stop.
-The string and cables are a set of Fuse from Hoyt. They are in good used condition. I would rate them an 8 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is an Apex Magnitude that is less than a year old. This is a standard mount 5 pin sight, all pins in .019 size as that is the only size offered on this sight. The sight offers the following:
-PRO•BRITE™ pin design increases brightness without crowding the sight picture
-GRAVITY-LINE™ rotational adjustment aligns aperture travel with gravity for long-distance precision
-Micro-adjustable windage and elevation
-Anti-reflective texture inside aperture and sunshade reduces glare
-Four-position windage gang adjustment for maximum compatibility and adjustment range
-Adjustable 2nd and 3rd axis level
-Aperture has 2 in. inside diameter
-Precision machined aluminum construction
-NEW shooter's ring design for even better peep alignment (bright day and glow-in-the-dark visibility with 90° alignment marks)
-Overbuilt aperture and mounting bracket for maximum strength and durability
-REVOLVE™ rotary sight light included
-Stainless steel hardware
-Removable machined aluminum sunshade included
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Hoyt Ultra Pro Series series drop away in black. This rest is made in incorporation of both Hoyt and QAD, and as you can see carries the Hoyt name and logo. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With this rest, you can draw the bow and let back down without the rest dropping away. This rest is one of the only rests that do this as most other models reset when the bow is drawn. This rest will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through Hoyt and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $230.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-The stabilizer is a Trophy Ridge Hitman 6 inch that also comes with a quick disconnect- making it much easier to get in and out of your case.
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in Realtree Edge camo and black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
I am not really interested in selling bare bow only, but if you would like to make an offer on the bare bow you can message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******