Gorgeous Mathews Monster MR6 Bow- 60/70 lb- LEFT Handed- 28.5" Draw - Lost Camo
For more detailed photos and a full item description please click on the link provided below:
This bow is in as nice of shape as I have seen this model in years.
It has been extremely well cared for.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you should you wish to add anything to the bow. All available items and bows are listed here and can be seen in my Storefront.
Bow Specifics:
- approximately 33" axle to axle
- 6" brace height
- up to 354 fps IBO
- 4.45 lbs (bare bow only)
Here are the specifics
-LEFT Handed
-The bow was is currently set up with 28.5 inch, 75% letoff modules. The draw length can only be changed by changing the mods on the bow.
This bow can be set up anywhere from 25.5 through 31 inches in draw length when the correct draw modules are installed.
I have NO other modules in stock.
This bow will be sold with the current 28.5 inch draw module installed only.
Other module sets are online or through any Mathews dealer, but again are not included here and I do not have any others to offer.
-70 pound limbs in factory Lost Camo finish. The limbs are currently topping out at just over 72 pounds on my scale and can be set as low as 58 pounds (though the peak weight may change with a change in draw length).
-The riser of the bow is in factory Mathews Lost Camo finish.
-The string and cable are in very good used condition. They are a newer custom set from Winner's Choice that were nearly $200 installed. They were just recently installed and have not been shot much at all.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-D loop is installed and ready to shoot.
-The rest is a Mathews Downforce. This is designed by Mathews and meant to work with their bows well, including the Mathews Harmonic Dampener that is in the rest.
The Downforce works off of the up cable, which allows for longer arrow guidance and better accuracy down range.
The rest is pulled into the down position prior to the shot, and the launcher then raises into the up position once the bow has been drawn.
There is an arrow holder on the shelf of the riser to help hold the arrow predraw.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Mathews Harmonic Dampener in the sight to match the bow and to even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a 4.5 inch in Mathews Lost Camo finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Brand New Alpine SoftLoc2 quick detaching 5 arrow quiver in Realtree Edge Camo finish is also included with the bow. This is obviously not a match to the Lost Camo, but it is about as close as is available any longer since Lost is no longer made. Both quiver and bracket are extremely light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight.
I also have some other quivers that could be included with the bow. If you would prefer to have a different quiver, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******