- All Right Handed 70 Pound Bow Packages (often multiple pages)
- Hoyt Right Hand 70 Pound Bow Packages
- NEW Hoyt Helix TURBO Bow Package #3 cam- 60/70 lb- 28 to 30"- Elevated II
NEW Hoyt Helix TURBO Bow Package #3 cam- 60/70 lb- 28 to 30"- Elevated II
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1250 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This bow is new and was set up for the first time as you see it here.
- approximately 31" axle to axle
- up to 350 fps ATA
- 5.75" brace height
- 80% letoff
- 4.4 lbs (bare bow only)
Here are the specifics:
-The bow is set up with #3 ZT Turbo Pro cams. The bow is currently set up at 29 inches in draw length. With the #3 ZT Turbo Pro cams, this bow is able to be set at 28 through 30 inches in half inch increments ONLY. This is done by installing the appropriate module set on the bow.
I currently have modules in stock in 28, 28.5, 29, 29.5 or 30 inches.
ONE module set will be included with your purchase.
Please just let me know which module set you will need installed upon making your purchase and I will be sure that is done prior to shipment.
-The riser of the bow is in the factory Gore Optifade Elevated II finish.
-70 pound limbs in factory Black finish. They will adjust from 58 to just over 73 pounds on average when timed and tuned correctly. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string is a factory set from Fuse/Hoyt. They are brand new, never set up, and have never been shot.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot at no additional cost to you.
-No string loop has ever been installed on the bow. I can install a string loop prior to shipping the bow out if you would like me to. Please just let me know you would like this done and I will be sure that a string loop is installed and ready to shoot at no additional cost to you.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Mathews Harmonic Dampener in the sight to match the bow and to even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Owner's manual, keychain, and decal, and new Hoyt hat are included.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******
I can also change any of the accessories you see here to others in stock, add a quiver, remove items from the package, etc, etc.
Please inquire about any changes BEFORE purchasing the bow.