LEFT Hand, Hoyt Nitrux Bow Package- Camo - 60 to 70 lb - 24 to 27"
For more detailed photos and a full item description please click on the link provided below:
This bow has been used for four seasons now, and does show cosmetic wear from that use.
If you are looking for something in great cosmetic condition, then this is not the bow for you.
Nothing here effects function in any way.
Please see the photos, as this is the actual bow that is for sale.
Bow Specifics:
- approximately 31.5" axle to axle
- 344 fps ATA
- 6 and 1/2" brace height
- 4.1 lbs (bare bow only)
Here are the specifics:
-LEFT Handed
-The bow is set up with the Hoyt #2 Nitrux cams. The bow is currently set up at 26 inches in draw length. With this cam, the bow can be set up anywhere from 24 through 27 inches ONLY.
Please just let me know what draw length you would like when making your purchase and I will be sure that is where the bow is set at.
-The riser of the bow is in the factory camo finish.
-70 pound limbs in factory Camo finish. They will adjust from 58 to nearly 74 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The string and cable set are the original set of Fuse from Hoyt. They have been on the bow since new. They are good for at least this year, but are starting to show the same wear as the rest of the bow. I would rate them a 7 of 10 in condition.
-The sight is a Brand New Copper John Mark I 5 pin in black finish. This sight offers Copper John's speed gap tech for zero pin gap, iron clad fibers to prevent against breakage, ultra bright microDot tech resulting in brighter pins, glow in the dark level, and integrated 3rd axis. All 5 pins are in .019 size. There is also an AfterBurner blue light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Hoyt edition QAD Ultra HDX Pro Series series drop in camo finish. This rest is made in incorporation of both the QAD and Hoyt companies to fit Hoyt bows perfectly. As you can see, it carries the Hoyt name and Hoyt logo. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through Hoyt and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new was $190.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a used LimbSaver 4".
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******