Elite Ritual Bow Package- 50 to 60 lb Draw Weight 28" Draw Length- Graphite Gray
For more detailed photos and a full item description please click on the link provided below:
This bow is one of a part of over 50 I just purchased in from another dealer.
They had to close through Covid and are now trying to get back up and going.
These bows were set up as you see them here by them, hung on the racks, and never sold.
I am going to list them as used, but they really have not ever been according to this shop and their current condition does prove that.
- approximately 33 and 1/4" axle to axle
- up to 335 fps IBO
- 6 and 3/4" brace height
- 4.3 lbs (bare bow only)
- 75 to 90% letoff
Here are the specifics:
-The bow is currently set at 28 inches in draw length. This bow is able to be set at anywhere from 26.5 through 31 inches in half inch increments, BUT THIS DOES REQUIRE A DIFFERENT MODULE SET TO BE INSTALLED ON THE BOW.
I do not have any other modules available, so the bow will be sold with the current 29" set only.
-The riser of the bow is in the factory Graphite Gray finish.
-60 pound limbs in factory black finish. They will adjust from 48 to 62 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out as part of the price you see here. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The string and cable set are the original set of Winner's Choice and are in great condition.
-The sight is a Brand New Head Hunter Pro 3 pin. 3 Precision steel pins, all in .010 size, with enclosed fiber optics so there is never any risk of breakage. The sight has second and third axis adjustability.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is an AXT Carbon Triad 8 inch in black finish.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Elite owner's manual, Elite decal and Elite hat are included.
If you would be interested in purchasing the bare bow only, I will sell the bow bare at a price of $600 (that does not include shipping nor any taxes- tax only applying to PA residents)
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******