Loaded BOWTECH Carbon Knight Bow Package- 60 to 70 lb- 26.5 to 30.5"- Black
For more detailed photos and a full item description please click on the link provided below:
This bow was used through the past few seasons and has been very well cared for in that time.
At only 3.2 pounds for the bare bow this is one of the lightest, if not the lightest, you will ever find!
-approximately 31" axle to axle
-3.2 lb (bare bow only)
-7" brace height
-335 FPS IBO
Here are the specifics:
-This bow can be adjusted anywhere from 26.5 to 30.5 inches in draw length. It is currently set at 30 inches, but I can set it wherever you would prefer prior to shipment. Please just let me know where you would like the draw length of the bow set after making the purchase I can set that for you prior to shipping the bow out.
-70 pound limbs in factory Black finish. The limbs will drop as low as 58 pounds and are topping out at just over 70 pounds on my scale.
-The riser of the bow is in factory Black finish.
-The string and cable are in good used condition. I would rate them an 8 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot at no additional cost to you.
-String stopper comes standard on this model and is included here.
-The rest is a Trophy Ridge Revolution. This is a full containment rest that will rotate out of the way when shot. This rest has the best containment of any fall away rest on the marktet as once it is set your arrow will stay securely in place until the bow is drawn and shot. With this rest you can draw the bow and let back down without the rest dropping away. This is one of very few rests that do this as most other models reset when the bow is drawn.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Harmonic Dampener in the sight to help even further reduce any noise and vibration.
If you are looking for something different in a sight please just let me know as I have many other sights around and I can let you know if I have what you are looking for in stock. Please inquire about any changes BEFORE you make the purchase though as any changes will change the price of the package as well.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******