Loaded Right Handed Hoyt Carbon Spyder 30 Bow Package- 26 to 28" and 50 to 60 lb
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1500 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This is a one owner bow that has been extremely well cared for and not shot much at all.
Please see the photos as they speak for themselves!
Bow Specifics:
- approximately 30" axle to axle
- 6.125" brace height
- Only 3.6 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow is set up with #2 Z5 cams, one of the smoothest drawing cams that Hoyt has ever produced. The bow is currently set up at 28 inches in draw length. With the #2 Z5 cams, this bow is able to be set at 26 through 28 inches in half inch increments ONLY. This is done by installing the appropriate module set on the bow.
I currently have modules in stock in 26, 26.5, 27, 27.5 or 28 inches ONLY.
ONE module set will be included with your purchase.
Please just let me know which module set you will need installed upon making your purchase and I will be sure that is done prior to shipment.
-The riser of the bow is in the factory Realtree camo finish.
-60 pound limbs in factory Realtree camo finish are installed on the bow. They will adjust from 48 to just over 63 pounds on average when timed and tuned correctly. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string set is a factory set from Hoyt that was installed less than a year ago. They are in very nice used condition. I would rate them a 9 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot at no additional cost to you.
-String loop is installed and ready to shoot at no additional cost to you.
-The sight is a Redline RL3 tool-less, micro adjust 5 pin sight in black finish. All pins are .019 in size. This is a very nice sight that offers tool-less locking adjustment knobs, precise micro adjustment for windage and elevation, enclosed fiber optic ring, 3 mounting points, bubble level, quick acquisition RI sight ring, and adjustable 1st and 2nd axis.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a QAD HD Ultra Pro series drop away in Black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro models have a lock down feature to prevent the launcher from bouncing up or vibrating after the shot. It also carries a lifetime warranty through QAD. The rest is all set up and ready to shoot.
MSRP on the rest when new is $130.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in Realtree camo and black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 400, 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Brand New Alpine SoftLoc2 quick detaching 5 arrow quiver in Realtree Camo finish is also included with the bow. The quiver uses the same bracket as the PowerLoc quiver. It is extremely light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight.
I am not really interested in selling bare bow only, but if you would like to make an offer on bare bow you can message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******