Loaded Elite Option 6 Bow Package- 50 to 60 lb Draw Weight- 27.5" Draw Length
For more detailed photos and a full item description please click on the link provided below:
Elite Option 6
This bow has been used through about 5 archery seasons now, and has been well cared for in that time. The string set was just installed last year.
Bow Specifics:
- approximately 32" axle to axle
- up to 342 fps IBO
- 6" brace height
- 4.3 lbs (bare bow only)
- 75 to 90% letoff
Here are the specifics:
-Right Handed
-The bow is currently set at 27.5 inches in draw length. This bow is able to be set at anywhere from 26 through 30 inches in half inch increments, BUT THIS DOES REQUIRE A DIFFERENT MODULE SET TO BE INSTALLED ON THE BOW.
I do not have any other modules available, so the bow will be sold with the current 27.5" set only.
-The riser of the bow is in the factory Black finish.
-60 pound limbs in factory black finish. They will adjust from 48 to 62 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The string and cable set are a custom set that are about a year old and were over $150 installed. They are in nice used condition, and I would rate them an 8.5 of 10 in condition.
-The sight is a Redline RL3 tool-less, micro adjust 5 pin sight in black finish. All pins are .019 in size. This is a very nice sight that offers tool-less locking adjustment knobs, precise micro adjustment for windage and elevation, enclosed fiber optic ring, 3 mounting points, bubble level, quick acquisition RI sight ring, and adjustable 1st and 2nd axis.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Trophy Ridge Whisker Biscuit. This is a nicer of the biscuits as it offers both vertical and horizontal adjustments for tuning. The biscuit is one of the most secure rests you will find. The arrow remains completely contained, so you can simply nock your arrow and go shoot/hunt, never worried about any moving parts to fail or the arrow falling from the bow. In all shooting tests the whisker biscuit is every bit as accurate as any drop away on the market (though truth be told, shooter form can most definitely effect this).
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a CBE Affect 6 inch in black finish. This is a carbon stabilizer with two weights at the end, each weight being one ounce. You can add weights to the stabilizer or remove some currently on it to customize the weight to your shooting needs (no other weights are included, only those two currently installed).
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is an Elite 5 arrow quick detaching quiver.
This is a very nice quiver in both look and function. It is made by Elite in order to work with their bows specifically. It detaches simply and quietly by lifting the locking latch and pulling the quiver from the mount. All is left is the small, light weight bracket attached to the riser. Should you choose to shoot with the quiver on the bow, it is locked securely into place with the locking latch so as not to vibrate and make noise when shooting.
I am not really interested in selling bare bow only, but if you would like to make an offer on just the bare bow you can message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******