Hoyt Spyder Turbo Bow Package #2 cam- 26 to 28"- Extra, New, 70 lb Limbs
For more detailed photos and a full item description please click on the link provided below:
This is a one owner bow that was just taken in.
The bow has been well cared for, but does have splinters in the top limbs.
This occurred a year and a half ago, The splinters were clipped, sanded and epoxied at that time. The bow has been shot and used ever since without any issues.
I am also including an additional set of new limbs for you as well (over a $300 additional value).
- approximately 34" axle to axle
- up to 340 fps ATA
- 6" brace height
- Only 4 lbs (bare bow only)
- RKT cams
Here are the specifics:
-The bow is set up with #2 RKT cams. The bow is currently set up at 27.5 inches in draw length. With the #2 RKT cams, this bow is able to be set at 26 through 28 inches in half inch increments ONLY. This is done by installing the appropriate module set on the bow.
I currently have modules in stock in 26, 26.5, 27, 27.5 or 28 inches.
ONE module set will be included with your purchase.
Please just let me know which module set you will need installed upon making your purchase and I will be sure that is done prior to shipment.
-The riser of the bow is in the factory black finish.
-The limbs currently installed are 60 pound limbs in factory black finish. They will adjust from 48 to just over 62 pounds on average when timed and tuned correctly. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
As is stated, there top limbs are splintered. Again, this has been shot and used for 18 months in this way without issue, but I am also including another brand new limb set for you.
The additional limbs are new and in black. These limbs were over $250.
-string stopper comes stock on the bow when new and is included here as well.
-The string is a custom set that are less than a month old. They are in extremely nice condition, were nearly $200 installed, and I would rate them an easy 9 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot at no additional cost to you.
-String loop is installed and ready to shoot at no additional cost to you.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******