Hoyt Carbon RX-5 Ultra Bow Package- 60/70 lb- RX5- 27 to 32" DL- Sitka EVII
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1750 before tax or a single accessory was added!!
Add all of the accessories you see here, and you can see just what you save.
This bow was used very sparingly for three years, and is in very nice used condition. The sticker normally covering the inside of the sight mount of the riser is missing. The original owner had changed this bow out to a picatinny mount briefly, but did not care for that option so then changed it back.
This effects nothing at all, but is something I wanted to point out for you.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not really interested in selling bare bow only.
Bow Specifics:
- approximately 34" axle to axle
- 334 fps ATA
- 7" brace height
- 85% letoff
- 4.6 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow is set up with HBX cams. The bow is currently set up at 29 inches in draw length. With these cams, this bow can be set up anywhere from 27 through 32 inches in draw length with the correct module set installed and set to the correct locations.
Please just let me know at which of those draw lengths you would like the bow to be set and I will be sure it is set to your requested length prior to shipment.
The bow is currently set at 85% letoff, but with the new cams and modules it is very simple to change that to 80% for those of you who would need or prefer 80%.
-The riser of the bow is in the factory Sitka Elevated II finish.
-70 pound limbs in factory Sitka Elevated II finish. They will adjust from 58 to just over 72 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The string is the original factory set from Fuse/Hoyt that are in nice used condition. I would rate them an 8 of 10.
-The sight is a Redline RL3 tool-less, micro adjust 5 pin sight in black finish. All pins are .019 in size. This is a very nice sight that offers tool-less locking adjustment knobs, precise micro adjustment for windage and elevation, enclosed fiber optic ring, 3 mounting points, bubble level, quick acquisition RI sight ring, and adjustable 1st and 2nd axis.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New QAD Ultra HDX Pro Series series drop away in black. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $150.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in grey finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******
I am not really interested in selling bare bow only, but if you would like to make an offer you can message that to me for consideration.