Mathews HTR NoCam Bow Package- 40 to 50 lb, Lost Camo -No Cam- Right Hand
For more detailed photos of this bow, please click on the link provided below:
This is a one owner bow that has been used sparingly over the past 5 years. It is in very nice used condition in every way, including a new custom string set with very few shots through it.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
- approximately 32" axle to axle
- 6.625" brace height
- 4.14 lbs (bare bow only)
Detailed Item Description
-Currently the bow is set up with a 26.5 inch Rock modules in 85% letoff. The draw length can be changed by changing the module set installed on the cam.
With the correct module set, this bow can be set up in any half inch increment from 24 to 30 inches.
I do have some other modules in stock.
Those available are 28.5, 27.5, 27, 26.5, 26, 25.5, 25, 24.5, or 24".
ONE set of modules will be installed on the bow and included.
If you do not see the module set you would like, I can order a different set in for you. This will take some time though, so if sold here on eBay without prior communication it will be only with one of the sets listed included.
-50 pound limbs in factory Mathews Lost Camo finish. The limbs are currently set at 52 pounds, but can be adusted anywhere from 38 pounds through 52 pounds.
Please just let me know where you would like the bow set within that range and I will be sure to set it prior to shipment.
-The riser of the bow is in Factory Mathews Lost Camo finish.
-The string set is a custom set from 60X that was $130 brand new. It has been on the bow for a period of about a month. They are a very easy 9+ of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Mathews Harmonic Dampener in the sight to even further reduce any noise and vibration as well as match the bow.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in Brown finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
I have some other stabilizers as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a used QAD Ultra HD Pro Series series drop away in camo finish. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $130.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 400 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
If you would be interested in the bare bow only, the bare bow can be purchased at a price of $550 (this does not include shipping nor any taxes collected by eBay).
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******