Loaded BOWTECH Revolt Bow Package- 60 to 70 lb- 26 to 31"- Kryptek Highlander
For more detailed photos and a full item description please click on the link provided below:
This bow was used through the past two archery seasons and has been well cared for in that time.
It is in great overall used condition.
-approximately 30" axle to axle
-4.4 lb (bare bow only)
-7.25" brace height
-335 FPS IBO
Here are the specifics:
-This bow can be adjusted anywhere from 25 to 30 inches in draw length. Please just let me know where you would like the draw length of the bow set after making the purchase I can set that for you prior to shipping the bow out.
-70 pound limbs in factory Kryptek Highlander finish (a very difficult finish to find). The limbs will drop as low as 58 pounds and are topping out at 71 pounds on my scale.
-The riser of the bow is in factory Kryptek Highlander finish.
-FlipDisc cam technology allows you to set the cam in two performance settings. Setting 1 is the performance setting- this will give you better speeds with lower letoff. Setting 2 is the comfort setting- this gives you the highest letoff, smoothest draw cycle, but does decrease your speed.
-Deadlock tuning system is a great advancement from Bowtech! This allows you to tune both cams and limbs without a bow press.
-The string and cable are a custom set from ABB (Americas Best Bowstrings) that were installed when the bow was new, so are two years old. I would rate them a 7.5 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-string stopper comes standard on this model and is included here.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Harmonic Dampener in the sight to even further reduce any noise and vibration.
If you are looking for something different in a sight please just let me know as I have many other sights around and I can let you know if I have what you are looking for in stock. Please inquire about any changes BEFORE you make the purchase though as any changes will change the price of the package as well.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******
If you would be interested in adding a case to the bow package, this bow can ship in a new Plano Parallel Limb bow case for an additional $110 (that covers both the cost of the case and the additional shipping cost as the size and weight will increase driving the shipping up).