Custom, Loaded Mathews V3X/33 Bow Package- Granite/Black - Many Lengths/Weights
For more detailed photos of this bow, please click on the link provided below:
This bow was used through last season by a Mathews certified tech, and it has been very well cared for. It is in very nice used condition in every possible way.
Custom color combinations like this are $100 more than standard at the time of purchase and carry a much longer wait time.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
- approximately 33" axle to axle
- 6.5" brace height
- up to 336 fps IBO
- 4.67 lbs (bare bow only)
Detailed Item Description
-The bow will be set up with 30.5 inch modules in 70 pound draw weight with 85% letoff.
-The limbs are in Factory Black finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Granite finish.
-The new Engage grip from Mathews is fantastic, and a great improvement over an already great grip in the previous models.
-The string set is the original set of Zebra Trophy from Mathews. They are in very nice used condition. I would rate them a 9 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight shown will be removed and excluded.
A new SpotHogg Fast Eddie XL 3 pin bow sight will be included with the purchase. The sight pins will be in .019 size.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in black finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
-The rest is a Mathews model QAD Ultra Pro Series series drop away in black. this rest is made in incorporation of both the Mathews and QAD companies and as can been seen carries the Mathews name as well as a Mathews Harmonic Damper over the mounting bolt area. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
This rest also carry a LifeTime Warranty through Mathews and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $180.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The arrows show will be excluded from the bow package.
One dozen Easton Axis SPT in 260 spine will be included.
They will be cut to length and the half out inserts will be installed prior to shipment.
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******