Loaded, Hoyt Carbon RX-3 Bow Package- 60-70 lb- REDWRX -RX3- 27" to 30" DL- Camo
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1700 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save.
This bow has been used through two hunting season, and has very been well cared for in that time.
- 30.5" axle to axle
- 342 fps ATA
- 6" brace height
- 3.9 lbs (bare bow only)
- 85% letoff
Here are the specifics:
-The bow is set up with #3 ZT Pro cams. The bow is currently set up at 29 inches in draw length. With the #3 ZT Pro cams, this bow is able to be set at 25 through 28 inches in half inch increments ONLY.
I can set this bow at 27, 27.5, 28, 28.5, 29, 29.5 or 30 inches in length. Please just let me know what length you need when making your purchase and I will be sure that the bow is set up at that length.
-The riser of the bow is in the factory Realtree Edge Camo finish.
-70 pound limbs in factory Realtree Edge Camo finish. They will adjust from 58 to just over 71 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The strings are a custom set from ABB (America's Best Bowstrings) that are in flo green and black as can be seen. This set was nearly $200 installed and are a 9 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Fuse Cybex XT 5 pin micro adjust in Realtree Edge Camo finish. Very nice sight. 5 Precision steel pins, all in .019 size. Micro click adjustment knobs for both windage and elevation allow for easy and precise adjustments. The sight has second and third axis adjustability. There are 8 interchangeable colored Stealth Bands that are included (the green is currently installed as can be seen in the photos). There is also a rheostat light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have some other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a QAD Ultra HDX Pro Series series drop away in black finish. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With this rest, you can draw the bow and let back down without the rest dropping away. This is one of few that do this as most other models reset when the bow is drawn. This rest will not drop away until the bow has been shot (or you flick the thumb wheel to release the arrow yourself).
This rest has a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
The rest also carries a lifetime warranty through QAD.
MSRP on the rest when new is $140.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Frontline Carbon 6 inch in Realtree Edge camo and black finish. This is a new stabilizer from Fuse for 2022. It has a new sleek design that helps to both eliminate wind drag and better steady the bow at full draw. There are weights at the end of the stabilizer that can be removed or added to in order to customize the weight of your stabilizer to your shooting preferences. The total current weight of the stabilizer is approximately 4.6 ounces, though again you could change this by removing or adding to the end weights (other weights sold separately and not included here). The stabilizer is constructed of lightweight carbon and machined aluminum.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in Realtree Edge camo and black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******