Loaded Mathews V3X/29 Bow Package- Ambush Green - Many DL/DW - Right Handed
For more detailed photos of this bow, please click on the link provided below:
The bow was used for about a month now and was just traded in. It is in very nice used shape in every way.
As those of you who have been to your local shop lately are no doubt aware, this bow carries a 3 month wait time, and as the season draws near for most that wait is only going to increase.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
Bow Specifics:
- approximately 29" axle to axle
- 6" brace height
- up to 340 fps IBO
- 4.47 lbs (bare bow only)
Detailed Item Description
-Right Handed
-Currently the bow is set up with 26.5 inch, 85% letoff, 70 pound modules (actually topping out at just over 73 pounds on my scale).
The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 25.5 through 30 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 60, 65, 70 or 75 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely).
I have modules in 85% in stock to set this bow at the following:
30"/70 lb
30"/65 lb
30"/60 lb
29.5"/70 lb
29.5"/65 lb
29"/70 lb
29"/65 lb
29"/60 lb
28.5"/75 lb
28.5"/70 lb
28.5"/65 lb
28.5"/60 lb
28"/75 lb
28"/70 lb
28"/65 lb
28"/60 lb
27.5"/70 lb
27.5"/65 lb
27.5"/60 lb
27"/70 lb
27"/65 lb
26.5"/75 lb
26.5"/70 lb
26.5"/65lb
26.5"/60 lb
26"/70 lb
26"/60 lb
25.5"/70 lb
25.5"/60 lb
I have just a few in 80%. Those are as follows:
- 29.5"/75 lb
- 29.5"/70 lb
- 29"/65 lb
- 28"/65 lb
- 27"/70 lb
ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price.
If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the module sets listed above will be installed and included.
-The limbs are in Factory Ambush Green finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Ambush Green finish.
-This bow has the Mathews Engage grip. They are a great improvement over those before it.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The string is the original factory set of Zebra Trophy from Mathews. They are in very nice used condition. I would rate them a 9 of 10 in condition.
-The sight is a Brand New Axion GLX 5 pin in matching Black finish. Those of you who are familiar with Axion are aware of their quality and durability. All pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Mathews Harmonic Dampener in the sight to match the rest of the bow and to help even further reduce noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Axion GLZ 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
-The rest is a Brand New QAD Ultra HDX Pro Series series drop away in black. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $140.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, Easton FMJ 340 spine arrows are included in the package at this pricing.
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in Black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is a great case and will also insure that your bow arrives safe and sound! It has movable Pillars in it so that it can be adjusted specifically to fit your bow. The pillars add strength and security to the case.
MSRP on the case is $120.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******