Hoyt Carbon Spyder Turbo Bow Package- 50 to 60 lb- 27.5" Camo- Ready to Shoot
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1500 when new!!
This bow is in good used condition. It has some cosmetic wear as should be expected on any 8 year old hunting bow, but it has been well cared for and is ready to go!
- 33" axle to axle
- 6" brace height
- 3.8 lbs (bare bow only)
- 340 fps IBO speed
Here are the specifics:
-The bow is set up with #2 Z5 cams, and is currently set at 27.5" in draw length.
These are widely regarded as one of the smoothest drawing and most desirable cams Hoyt has ever produced.
With the #2 Z5 cams, this bow is able to be set up anywhere from 26 through 28 inches in every half inch increment. THIS WILL REQUIRE A DIFFERENT MODULE SET TO BE INSTALLED ON THE BOW. OTHER MODULES ARE NOT INCLUDED.
THIS BOW IS BEING SOLD AT ITS CURRENT 27.5" DRAW LENTH ONLY.
-The riser of the bow is in the factory Realtree Xtra camo.
-60 pound limbs in factory Realtree Xtra camo finish. They will adjust from 48 to just over 61 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are now about two years old. They are a custom set from SSS (schmidty Specialty Strings) that were around $150 new.
They are currently around a 7.5 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Fuse 3 pin in black finish. Fuse is a subsidiary of Hoyt. All 3 pins are in .019 size.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a Fuse drop away in matching black finish. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With this rest, you can draw the bow and let back down without the rest dropping away.
There is no containment bar on the rest.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Fuse Intrepid 6 inch in Realtree Xtra camo and black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. The Shock Rod dampers are in orange to match the rest of the bow. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
If you would be interested in the bare bow only, I would sell the bow bare at a price of $600 (this does not include shipping nor any taxes- tax applicable only in the state of PA).
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******