Hoyt Carbon Spyder TURBO Bow Package- #3 cam- 50/64 lb- 28 to 30"- Black-Z5 Cams
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1499 before tax or a single accessory was added!!
Add the great accessories you see here in this package and you see just how much you can save here.
This is a one owner bow that was just taken in. It is in as nice of condition as I have seen this model for years now.
It has been used and hunted sparingly, had a new string set installed less than a year ago, and it has been well cared for.
As those of you who know this model are no doubt well aware, it is highly regarded as one of the nicest, smoothest drawing, yet fastest bows that Hoyt has ever put out.
This bow has the Z5 cam system, again regarded as many as the best cam that Hoyt has ever produced.
Bow Specifics:
- 33" axle to axle
- 6" brace height
- 3.8 lbs (bare bow only)
- 340 fps IBO speed
Here are the specifics:
-Right Handed
-The bow is set up with #3 Z5 cams. The bow is currently set up at 28 inches in draw length.
With the #3 Turbo cams, this bow is able to be set at 28, 28.5, 29, 29.5 or 30 inches ONLY.
This is done by changing the module set on the bow.
Please let me know where you would like it to be set and I will be sure to set the draw length for you prior to shipment.
ONE set of modules of your choice will be installed on the bow (some are red and some black in color).
Individual module sets are not available for purchase unless purchasing the full bow package.
-The riser of the bow is in the factory Black finish.
-60 pound limbs in factory black finish. They will adjust from 48 to just over 64 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cable are in very nice shape as they were installed less than a year ago. They are a factory set of Fuse strings from Hoyt in the matching original black and grey colors as can be seen in the photos. This string set was over $150 installed and I would rate it a 9 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Trophy Ridge 5 pin in black finish. All pins are in .019 size. There is a light added to the sight. The light is working, but is pretty dim at this time. The light mounts so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I also have many other models of sight in stock should there be something else that you are interested in. Please just contact me to inquire about any changes you would like to be BEFORE you purchase the bow to check on availability and pricing of any changes you would like made.
-The rest is a Hoyt model QAD Ultra Pro in black finish. This rest was made in incorporation of both the Hoyt and QAD companies to fit the Hoyt riser perfectly. As can be seen it carries the Hoyt log and has a Hoyt stickered decal over the mounting areas of the rest. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is the only rest that does this as all other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot. The rest also has a lock down feature to prevent bounce back an vibration of the launcher and carries a LifeTime Warranty through Hoyt.
The rest is all set up and ready to shoot.
MSRP on the rest was $170 when new.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $120.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******