- Storefront
- >
- Left Handed Bow Packages
- >
- Loaded LEFT Hand Hoyt Ventum 30 Bow Package- Camo, 25 to 30", 60 to 70 Lb
Loaded LEFT Hand Hoyt Ventum 30 Bow Package- Camo, 25 to 30", 60 to 70 Lb
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1200 before tax or a single accessory or any set up was added on these Ventum 30 bows!!
This bow is one of a part of over 50 I just purchased in from another dealer.
They had to close through Covid and are now trying to get back up and going.
These bows were set up as you see them here by them, hung on the racks, and never sold.
I am going to list them as used, but they really have not ever been according to this shop and their current condition does prove that.
Bow Specifics:
- approximately 30" axle to axle
- 342 fps ATA
- 6 and 1/8" brace height
- 80 and/or 85% letoff
- 4.6 lbs (bare bow only)
Here are the specifics:
-LEFT Handed
-The bow is set up with Hoyt's HBX cams. The bow is currently set up at 29 inches in draw length. With the new cam, this bow can be set up anywhere from 25 through 30 inches in draw length with the correct module set installed and set to the correct locations.
Please just let me know what draw length you would like when making your purchase and I will be sure that is where the bow is set at.
The bow is currently set at 85% letoff, but with the new cams and modules it is very simple to change that to 80% for those of you who would need or prefer 80%.
-The riser of the bow is in the factory Realtree Edge Camo finish.
-70 pound limbs in factory Realtree Edge Camo finish. They will adjust from 58 to just over 72 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string is the original factory set of Fuse from Hoyt. They are in great condition as they have only had a loop installed and may have been shot a few times if at all.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Fuse Cybex XT 5 pin micro adjust in Realtree Edge Camo and black finish. Very nice sight. 5 Precision steel pins, all in .019 size. Micro click adjustment knobs for both windage and elevation allow for easy and precise adjustments. The sight has second and third axis adjustability. There are 8 interchangeable colored Stealth Bands that are included (the green is currently installed as can be seen in the photos). There is also a rheostat light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Flex Torch 5.5 inch in camo finish.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in Realtree Edge camo and black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-Hoyt Hat, owner's manual, Hoyt decals and Hoyt keychain are included.
If you would be interested in purchasing bare bow only, I would sell the bow bare at a price of $850 (this does not include shipping nor any applicable taxes in your area- taxes in PA only).
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******