Loaded Right Hand Hoyt Ventum 33 Bow Package- Wilderness, 26 to 31", 80 Lb Limbs
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW WAS $1300 before tax, a single accessory or any set up was added on this bow!!
This bow was used through three hunting seasons and has been very well cared for in that time and has a brand new string set installed.
It is in very nice used condition in every way.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
Bow Specifics:
- approximately 33 and 1/8" axle to axle
- 334 fps ATA
- 6 and 3/8" brace height
- 80 and/or 85% letoff
- 4.7 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow is set up with Hoyt's HBX cams. The bow is currently set up at 28 inches in draw length. With the new cam, this bow can be set up anywhere from 26 through 31 inches in draw length with the correct module set installed and set to the correct locations.
Please just let me know what draw length you would like when making your purchase and I will be sure that is where the bow is set at.
The bow is currently set at 85% letoff, but with the new cams and modules it is very simple to change that to 80% for those of you who would need or prefer 80%.
-The riser of the bow is in the factory Wilderness finish.
-80 pound limbs in factory Wilderness finish. They will adjust from 68 to 80 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-String and cables are a brand new custom set from 60X that were nearly $200 installed. They are not yet set up, but I can do that for you as part of the purchase price listed here.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has yet been installed, but I can do that for you if you would like for me to do so. Please just let me know that you would like a string loop installed prior to shipment and I will be sure that one is installed and ready to shoot at no additional cost to you.
-The sight is a Brand New Trophy Ridge Fix-5 in black finish. Very nice sight. 5 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. Aluminum construction, 2nd axis leveling, onboard adjustment tool. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Hoyt model QAD Ultra Pro Series series drop away in Black finish. This rest is made in incorporation of both Hoyt and QAD, to fit Hoyt bows well. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through Hoyt and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
The rest is all set up and ready to shoot.
MSRP on the rest is $180.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in black finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Tight Spot Pivot 2 piece fixed position 5 arrow quiver in OD Green that matches the finish of the bow pretty well as can be seen in the photos. This quiver offers the ultimate in adjustment and as those of you who are TightSpot fans know, the gripper is adjustable to hold any diameter arrow extremely well.
MSRP on the quiver is $220.
I am not really interested in selling bare bow only, but if you would like to make an offer that can be sent over for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******