Loaded LEFT Hand Bowtech Core SS Bow Package-26 to 31", 60 to 70 lb- Bottomland
For more detailed photos and a full item description please click on the link provided below:
MSRP on bare bow only is $1400 before you add set up or a single accessory!
This bow was used through one season.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
Details:
-LEFT Handed
-approximately 31.5" axle to axle
-4.5 lb (bare bow only)
-6.25" brace height
-337 fps IBO
-FlipDisc technology
-Deadlock Tuning system
Here are the specifics:
-LEFT Handed
-The bow can be set up anywhere from 26 through 31 inches in draw length. This can all be done without the use of a bow press, and no new parts are required to make the change.
I can set it wherever you would like within the stated draw range prior to shipment at no additional charge.
Please just let me know what draw length you would like when making your purchase and I will be sure that is where the bow is set at.
-The riser of the bow is in the factory Mossy Oak Bottomland finish.
-70 pound limbs in factory Mossy Oak Bottomland finish. They will adjust from 58 to just over 70 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The strings are the original factory set. They have been used through one season and are in good used shape. I would rate them an 8.5 of 10.
-The sight is a Redline RL3 tool-less, micro adjust 3 pin sight in black finish. All pins are .019 in size. This is a very nice sight that offers tool-less locking adjustment knobs, precise micro adjustment for windage and elevation, enclosed fiber optic ring, 3 mounting points, bubble level, quick acquisition RI sight ring, and adjustable 1st and 2nd axis.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Trophy Taker Limb Driven rest. This rest operates much like Hamskea and Trophy Taker rests, being pulled down into place by the limb when the bow is at rest and rising once the bow is drawn. This allows for longer arrow guidance and faster retraction of the launcher with far fewer parts to go wrong or fail like many mechanical drop away rests that work off of the bow cable. The micro tune adjustments also make this rest extremely quick and easy to adjust and fine tune for your shooting needs.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in brown finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
I also have some other stabilizers that could be included with the bow. If you would prefer to have a different stabilizer, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 350 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Bowtech Center Mass 4 arrow quiver in matching Mossy Oak Bottomland finish. This is a very nice quiver in both look and function. It mounts securely to the mounting post installed on the riser. When detached, all that remains is the very small, light-weight bracket on the top area of the riser. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached. The bottom arrow gripper has adjustable wedges to firmly hold any diameter arrow in place, and the top secondary arrow gripper helps aid in that process as well.
New MSRP on the quiver is $220.
I am not really interested in selling bare bow only, but if you have an offer please feel free to message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******