- Storefront
- >
- Left Handed Bow Packages
- >
- Gorgeous, Loaded, LEFT Handed Mathews Prima Bow Package- Several Lengths Avail
Gorgeous, Loaded, LEFT Handed Mathews Prima Bow Package- Several Lengths Avail
For more detailed photos and a full item description please click on the link provided below:
The bow has been used through three seasons, and it has been very well cared for in that time.
The string set is a custom GAS set that is just a few months old. It is in great used condition and was $200 installed, so a great advantage.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
Bow Specifics:
- approximately 30" axle to axle
- 5 and 1/2" brace height
- up to 321 fps IBO
(this is calculated at 27.5" since that is the longest draw length on this model. If calculated at
30" as others are the IBO would be 346 FPS)
- 3.93 lbs (bare bow only)
Here are the specifics:
-LEFT Handed
-Currently the bow is set up with 27 inch, 80% letoff
The draw length can be changed by changing the mods on the bow.
This bow can be set up anywhere from 21.5 through 27.5 inches in draw length in either 80% speed modules or 80% Rock modules when the correct draw modules are installed.
I have a few other module sets in stock.
You can choose from the following:
27.5" Speed modules
27" Rock modules
26.5" Rock Modules
26" Rock modules
25.5" Rock Modules
25" Rock Modules
23.5" Speed Modules
ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price.
If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the two module sets listed above will be installed and included.
-The limbs are in Factory Ambush finish. The limbs are 60 pound limbs, currently maxing out at 61 pounds. These limbs can be set anywhere from 48 through 61 pounds safely.
Please just let me know where you would like the draw weight to be set upon purchasing the bow and I can be sure to set that for you prior to shipment at no additional cost.
-The riser of the bow is in Factory Ambush finish.
-This bow has Engage side plates installed. I very nice improvement over past grips as it thins down the grip area and helps to reduce torque top increase accuracy down range.
-The string set is a custom set from GAS that were installed just a few months ago. They are in very nice used condition. This string set was $200 installed, so a very nice advantage.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Redline RL3 tool-less, micro adjust 3 pin sight in black finish. All pins are .019 in size. This is a very nice sight that offers tool-less locking adjustment knobs, precise micro adjustment for windage and elevation, enclosed fiber optic ring, 3 mounting points, bubble level, quick acquisition RI sight ring, and adjustable 1st and 2nd axis.
I have some other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Axion GLZ 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, Victory VForce Sport 400 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*Victory VForce Sport arrows in 400, 350, 300 or 250 spines-These can be included at the listed pricing.
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Victory VForce Gamer arrows in 400, 350, 300 or 250 spines-These are an additional $25.
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently listed arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
I am not really interested in selling just bare bow only, but if you would like to make an offer on the bare bow you can message that to me for consideration.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******