NEW Hoyt Helix TURBO Bow Package #3 cam- 60/70 lb- 28 to 30"- Realtree Edge/Black
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW ALONE IS $1250 before any accessories, tax, set up, or shipment.
This bow is new and unshot.
- approximately 31" axle to axle
- up to 350 fps ATA
- 5.75" brace height
- 80% letoff
- 4.4 lbs (bare bow only)
Here are the specifics:
-The bow is set up with #3 ZT Turbo Pro cams. The bow is currently set up at 29 inches in draw length. With the #3 ZT Turbo Pro cams, this bow is able to be set at 28 through 30 inches in half inch increments ONLY. This is done by installing the appropriate module set on the bow.
I currently have modules in stock in 28, 28.5, 29, 29.5 or 30 inches.
ONE module set will be included with your purchase.
Please just let me know which module set you will need installed upon making your purchase and I will be sure that is done prior to shipment.
-The riser of the bow is in the factory Realtree Edge Camo finish.
-70 pound limbs in factory Black finish. They will adjust from 58 to just over 73 pounds on average when timed and tuned correctly. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string is a factory set from Fuse/Hoyt. They are brand new, never set up, and have never been shot.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot at no additional cost to you.
-No string loop has ever been installed on the bow. I can install a string loop prior to shipping the bow out if you would like me to. Please just let me know you would like this done and I will be sure that a string loop is installed and ready to shoot at no additional cost to you.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Axion Hybrid Dampener in the sight to even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 400, 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Owner's manual, keychain, and decal, and new Hoyt hat are included.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is a great case and will also insure that your bow arrives safe and sound! It has movable Pillars in it so that it can be adjusted specifically to fit your bow. The pillars add strength and security to the case.
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******