Loaded, LEFT Hand Hoyt Carbon RX-3 Bow Package- 60-70 lb -RX3- 27" to 30" DL
For more detailed photos and a full item description please click on the link provided below:
SUGGESTED RETAIL PRICE ON BARE BOW IS $1700 before tax!!
This bow has been used through three archery seasons, and does have some cosmetic wear from that time. There is nothing at all that effects the function of the bow in any way.
The price is adjusted to reflect the cosmetic wear, and photos of this are listed.
- 30.5" axle to axle
- 342 fps ATA
- 6" brace height
- 3.9 lbs (bare bow only)
Here are the specifics:
-The bow is set up with #3 ZT Pro cams. The bow is currently set up at 28 inches in draw length. With the #3 ZT Pro cams, this bow is able to be set at 27 through 30 inches in half inch increments ONLY.
I can set this bow at 27, 27.5, 28, 28.5, 29, 29.5 or 30 inches in length. Please just let me know what length you need when making your purchase and I will be sure that the bow is set up at that length.
-The riser of the bow is in the factory Black finish.
-70 pound limbs in factory Black finish. They will adjust from 58 to just over 70 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The strings are the original factory set of Fuse from Hoyt. They do show wear normal with three years of shooting. They are in no way in need of changing out right now, but if it were my bow I would likely put a new set on soon (which I can do for you prior to shipment at additional cost if you would like that to be done). I would rate the current set a 6.5 to 7 of 10 in condition.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a CBE Tactic 3 pin in black finish. Very nice sight. 3 Precision bladed pins, all in .019 size.
I have some other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Hoyt model QAD Ultra Pro Series series drop away in black finish. As can be seen, the rest carries the Hoyt name and Hoyt logo. This rest is designed in incorporation of both QAD and Hoyt to fit the Hoyt riser perfectly. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With this rest, you can draw the bow and let back down without the rest dropping away. This is one of few that do this as most other models reset when the bow is drawn. This rest will not drop away until the bow has been shot (or you flick the thumb wheel to release the arrow yourself).
This rest has a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
The rest also carries a lifetime warranty through Hoyt.
MSRP on the rest when new is $180.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******