- Storefront
- >
- Right Handed 65 Pound Bow Packages
- >
- NEW, Loaded 2021 PSE Evo EVL 32 Bow Package- 25 to 30.5" - 55 to 65 lb- Black
NEW, Loaded 2021 PSE Evo EVL 32 Bow Package- 25 to 30.5" - 55 to 65 lb- Black
For more detailed photos and a full item description please click on the link provided below:
This bow is new. It was set up for the first time for the photos you see here.
Bow Specifics:
- approximately 32" axle to axle
- 345 fps ATA
- 6 and 1/4" brace height
- 80 to 90% letoff
- 4.5 lbs (bare bow only)
Here are the specifics:
-Right Handed
-The bow has PSE's well known and loved Evolve cams. The bow is currently set up at 29 inches in draw length. With this cam on this bow it can be set up anywhere from 25 through 30.5 inches in draw length with the module set to the correct locations.
Please just let me know at which of those draw lengths you would like the bow to be set and I will be sure it is set to your requested length prior to shipment.
The bow can be set anywhere from 80 to 90 percent in letoff, and also offers the new Precision Buss Tuning system.
-The riser of the bow is in the factory Black finish.
-65 pound limbs in factory Black finish. They will adjust from 53 to 65 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has ever been installed on the bow. I can install a string loop prior to shipping the bow out if you would like me to. Please just let me know you would like this done and I will be sure that a string loop is installed and ready to shoot.
-The string is the original factory set from LiveWire that are in new condition as they have never been shot.
-The sight shown will be eliminated and excluded.
A new CBE Engage Hybrid 3 pin will be included.
-The rest is a Brand New QAD Ultra HDX Pro Series series drop away in black. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $140.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in Black finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
-12 BRAND Easton Axis 5mm carbon arrows will be included at the listed price.
-Also included is a Brand New quick detaching Fuse Maxxis 6 arrow quiver in black finish. This is a very nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is a great case and will also insure that your bow arrives safe and sound! It has movable Pillars in it so that it can be adjusted specifically to fit your bow. The pillars add strength and security to the case.
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******