Loaded 2020 Hoyt Torrex XT Bow Package- 55 to 65 lb- 25.5" to 30", Black
For more detailed photos and a full item description please click on the link provided below:
This bow was used very sparingly through this past archery season. It is in very nice used condition in every way possible.
- approximately 30" axle to axle
- up to 336 fps ATA
- 6" brace height
- Adjustable from 25.5 to 30" in any half inch increment
- 4 lbs (bare bow only)
Here are the specifics:
-The bow is set up with Torrex XT cams. The bow is currently set up at 29 inches in draw length. With the Torrex XT cams, this bow is able to be set at anywhere from 25.5 through 32 inches in half inch increments.
Meaning that this bow can be set at 25.5, 26, 26.5, 27, 27.5, 28, 28.5, 29, 29.5 or 30 inches in length. Please just let me know what length you need when making your purchase and I will be sure that the bow is set up at that length.
-The riser of the bow is in the factory Black finish.
-65 pound limbs in factory black finish. They will adjust from 53 to just over 67 pounds on my scale safely (though changing the draw length could also change the effective draw weight). I can adjust this anywhere in the range of this bow for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a new Fuse Cybex 3 pin in black finish. 3 pins, all in .019 size. There is also a sight light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 400, 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
- Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in Black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******