- Right Handed 65 Pound Bow Packages
- Loaded Hoyt HyperForce Bow Package #3 cam- 55 to 65 lb- 27 to 30"- Kuiu Verde
Loaded Hoyt HyperForce Bow Package #3 cam- 55 to 65 lb- 27 to 30"- Kuiu Verde
For more detailed photos and a full item description please click on the link provided below:
This bow is one of a part of over 50 I just purchased in from another dealer.
They had to close through Covid and are now trying to get back up and going.
These bows were set up as you see them here by them, hung on the racks, and never sold.
I am going to list them as used, but they really have not ever been according to this shop and their current condition does prove that.
- approximately 32" axle to axle
- 340 fps ATA
- 6" brace height
- 4.3 lbs (bare bow only)
- 85% letoff
Here are the detailed specifics:
-The bow is set up with #3 ZT cams. The bow is currently set up at 29.5 inches in draw length. With the #3 ZT cams, this bow is able to be set at 27 through 30 inches in half inch increments ONLY.
Please just let me know where you would like it to be set and I can be sure to do that for you prior to shipment.
-The riser of the bow is in the factory Kuiu Verde finish.
-65 pound limbs in factory Kuiu Verde finish. They will adjust from 53 to 67 pounds on my scale safely. I can adjust this anywhere in that effect range for you prior to shipping the bow out at no additional charge.
-string stopper comes stock on the bow when new and is included here as well.
-The string and cables are the original set of Fuse from Hoyt. They are in fantastic condition as they have never been fully set up but may have been shot a few times if that.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out as part of the price you see here. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has ever been installed on the bow. I can install a string loop prior to shipping the bow out if you would like me to. This is included in the listed price. Please just let me know you would like this done and I will be sure that a string loop is installed and ready to shoot.
-The sight is a Brand New Copper John Mark I 5 pin in black finish. This sight offers Copper John's speed gap tech for zero pin gap, iron clad fibers to prevent against breakage, ultra bright microDot tech resulting in brighter pins, glow in the dark level, and integrated 3rd axis. All 5 pins are in .019 size. There is also an AfterBurner blue light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Trophy Ridge Whisker Biscuit. The biscuit is one of the most secure rests you will find. The arrow remains completely contained, so you can simply nock your arrow and go shoot/hunt, never worried about any moving parts to fail or the arrow falling from the bow. In all shooting tests the whisker biscuit is every bit as accurate as any drop away on the market (though truth be told, shooter form can most definitely effect this).
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-The stabilizer is a Brand New Fuse Intrepid 6 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has Shock-Rod technology from Hoyt. These Shock Rods are in two modular weights that can be moved forward or back on the stabilizer to better weight the stabilizer to your shooting preferences. Total current weight of the stabilizer is approximately 5 ounces, though you could change this by removing one or both of the modular weights again to better fit your shooting preferences.
-Also included is a Brand New quick detaching Fuse Maxxis 4 arrow quiver in black finish. This is a nice quiver in both look and function. It mounts securely with a screw down locking knob that attaches to the very small, light-weight mounting bracket that mounts to the rear of the sight. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it can be secured tightly with the screw-down locking knob. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
-Hoyt Owner's manual, Hoyt keychain, and Hoyt decal are included.
If you would be interested in purchasing the bare bow only, I would sell the bow bare at a price of $700 (that does not include shipping nor any taxes that eBay will collect for your area).
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******