- Storefront
- >
- All Right Handed 70 Pound Bow Packages (often multiple pages)
- >
- Mathews Right Hand 70 Pound Bow Packages
- >
- Mathews Creed Bow Package- Lost Camo -29" and 70 lbs- New GAS String Set
Mathews Creed Bow Package- Lost Camo -29" and 70 lbs- New GAS String Set
For more detailed photos of this bow, please click on the link provided below:
This bow is part of a shop I recently purchased.
It has never been sold, and it was only set up for the first time for the photos you see here.
I am listing it as used as it is now a bow that is 8 to 9 models old.
I did install a new set of GAS strings- which is a $200 advantage over any used bow you will ever find.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
Bow Specifics:
- approximately 30" axle to axle
- 7" brace height
- 3.85 lbs (bare bow only)
Here are the specifics
-Right Handed
-Currently the bow is set up with a 29 inch cam.
This bow does require a new cam to be installed to change the draw length on the bow.
I HAVE NO OTHER CAMS TO OFFER, so the bow will be sold at the current 29 inch draw length ONLY.
If you do purchase a different cam (either online somewhere or from any Mathews dealer) the bow is then able to be set anywhere from 26 through 30 inches in draw length in any half inch increment.
-The limbs are in Factory Mathews Lost Camo and are 70 pounds in draw weight.
These limbs can be set anywhere from 58 pounds to nearly 74 pounds on my scale. Please just let me know where you would like the bow set, and I can be sure to set that for you prior to shipment.
-The riser of the bow is in Factory Mathews Lost Camo finish.
-The string is a custom set from GAS. This is a $200 value versus any other Creed you will find.
There was no issue at all with the original string set, but it had been on the bow for about 8 years. Even though the original string set was unused, I felt it would be best changed out, and did so with one of the best string sets offered.
-No peep sight has ever been installed in the string. If you would like me to install a peep sight prior to shipping, I will install a brand new peep sight prior to sending the bow out. I have tubeless RAD Super Deuce peep sights in either 3/16 or 1/4 inch sizes. Please just let me know you would like this done and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-No string loop has yet been installed, but I can do that for you if you would like for me to do so. Please just let me know that you would like a string loop installed prior to shipment and I will be sure that one is installed and ready to shoot at no additional cost to you.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also an Mathews Harmonic Dampener in the sight to match the bow and to even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New BeeStinger MicroHex Hunter 6 inch in Black finish. This is a nice stabilizer in both look and function. The microhex design helps to really slim down the profile of the stabilizer to allow it to be smaller and less effected by wind or conditions while still delivering all the great vibration reduction and stability you are accustomed to from BeeStinger. Total current weight of the stabilizer is approximately 5.8 ounces and approximately 6.5 inches in length with all weights installed. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
I have some other stabilizers as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
I am not really interested in selling just bare bow, but if I were to place a price on that it would be $600 plus shipping and any taxes that would apply for your location.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******