Loaded Mathews Z7 Xtreme Bow Package- 28" Draw, 60 to 70 lb - Lost Camo
For more detailed photos and a full item description please click on the link provided below:
This bow was just taken in and set up as you see it here.
It is in very nice shape for a bow of its age, and as those of you who have been looking are no doubt aware a very difficult bow to find any more.
Those who have them are just not giving them up often!
Bow Specifics
- approximately 28" axle to axle
- 7 and 3/8" brace height
- 3.98 lbs (bare bow only)
- up to 330 fps IBO
Here are the specifics:
-Right Handed
-Currently the bow is set up with a 28 inch cam. The draw length can only be changed by changing the cam installed on the bow.
I have no other cams at all for this bow.
It will be sold as it currently sits- with the 28 inch cam installed.
With the correct cam installed the bow can be set up anywhere from 25 to 30 inches in any half inch increment.
Again though, I have no other cams so will be including the current 28 inch cam ONLY.
-70 pound limbs in factory Mathews Lost Camo finish. The limbs currently top out on my scale at just over 73 pounds and can be set as low as 58 safely.
-The riser of the bow is in factory Mathews Lost Camo finish.
-The grip has been upgraded to a much newer Mathews Flatback grip. This is a slimmer grip than the original bulky wood grip that helps to eliminate torque and increase accuracy downrange when shooting.
-The string and cable are in good used condition as they are less than a year old. I would rate them an easy 8 of 10.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Copper John Dead Nuts 3, Mark III 5 pin in camo finish (not an exact match, but as you can see from the photos not bad at all- camo sights are getting extremely difficult to find any more). This sight offers Copper John's speed gap tech for zero pin gap, iron clad fibers to prevent against breakage, ultra bright microDot tech resulting in brighter pins, all metal construction, integrated 3rd axis, and capable of taking a lense. All 5 pins are in .019 size. There is also an AfterBurner blue light added to the sight. The light mounts in the housing of the sight, so that it shines only on the wrapped fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I also have many other sights should you want something other than this one. Please just either send me a message or call to inquire about the sight you are interested in and I can let you know if I have it available and what, if any, difference in price there will be.
-The stabilizer is an Stokerized 6 inch in matching Mathews Lost camo finish with red acrylic rod. This is a nice stabilizer in both look and function. The Saturn dampener on the end and acrylic rod help to dampen noise and vibration. That Saturn dampener can be removed, changed to a heavier one, etc should you choose to do so. I do not have other dampeners or weight in stock to offer, so this one will be sold and delivered installed on the bow as you see it here.
-The rest is a Brand New QAD Ultra Hunter series drop away in black finish. This is a great rest that gives you the best of both a containment rest and the drop away. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
The rest is all set up and ready to shoot.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Brand New Alpine SoftLoc2 quick detaching 5 arrow quiver in Realtree Xtra camo finish is also included with the bow (Again, this is not an exact match, but as you can see from the photos not bad at all- and there is no no one making a Lost Camo quiver any longer). This is the latest release from Alpine, and is a very nice upgrade to the original SoftLoc. The new SL2 uses the same bracket as the PowerLoc quiver. It is extremely light weight. The one you see pictured was removed and set up on the bow just for the photos. This is a great quiver that is very easy and quiet to attach and detach from the bow. There is a ton of vertical adjustment available in the quiver so that it can be mounted wherever you prefer to balance out the bow. When detached, nothing is left on the bow but a very small, lightweight bracket on the back of the sight.
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is the latest release from Plano, and is fully adjustable so that it can be set up to fit your exact set up. I will be sure and set the case up prior to shipping out. The pillars are movable, and offer great protection for the inside portion of the case to keep the bow and its contents safe. This will also help to insure that your bow arrives safe and sound!
MSRP on the case is $120.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******