Loaded Right Handed Mathews VXR 31.5 Bow Package- Realtree Edge Camo
For more detailed photos of this bow, please click on the link provided below:
The bow was used sparingly through this past season. It has been well cared for and is in very nice used shape.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
- approximately 31.5" axle to axle
- 6" brace height
- up to 343 fps IBO
- 4.66 lbs (bare bow only)
Detailed Item Description
-Currently the bow is set up with 29 inch, 85% letoff, 70 pound modules (actually topping out at just over 73 pounds on my scale).
The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 26.5 through 31 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 60, 65, 70 or 75 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely).
I have modules in 85% in stock to set this bow at the following:
I have just a few in 80%. Those are as follows:
- 29.5"/70 lb
- 29"/75 lb
- 29"/65 lb
ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price.
If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the module sets listed above will be installed and included.
-The limbs are in Factory Realtree Edge camo finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Realtree Edge camo finish.
-This bow has the new Engage side plates installed- an improvement on even the very nice Engage Grip as it slims the grip area down even further to help eliminate torque and improve accuracy.
-The string and cables are new and were jus installed. The original set had a cut strand around the peep, so I replaced the full set with a new Zebra Trophy set from Mathews.
-string stopper comes stock on the bow when new and is included here as well.
-No peep sight has yet been installed in the new string, but I can do that for you prior to shipment at no additional cost. I have RAD Super Duece peep sights in black only and in either 1/4" or 3/16" sizes. Please just let me know which you would prefer when making your purchase and I will be sure that a peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Axion GLX 5 pin in black finish. Those of you who are familiar with Axion are aware of their quality and durability. All 5 pins are in .019 size. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting. There is also a Mathews Harmonic Dampener in the sight to match the rest of the bow perfectly and even further reduce any noise and vibration.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Fuse Carbon Torch FX 6 inch in matching Realtree Edge Camo and black finish. This is a nice stabilizer in both look and function. As can be seen, it has the new Stealth Disc dampener technology on the ends of the stabilizer. The red discs are currently installed, but all of the color discs are included should you ever with to change up the color. Total current weight of the stabilizer is approximately 7.4 ounces. There are three weights that are included and currently installed. Each of these weights is 1 ounce. These can be removed if you wish to alter the weight of the stabilizer to best fit your shooting preferences.
-The rest is a used QAD Ultra HDX Pro drop away in Realtree camo finish. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through QAD and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $160.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 400, 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in Realtree Edge and Black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is a great case and will also insure that your bow arrives safe and sound! It has movable Pillars in it so that it can be adjusted specifically to fit your bow. The pillars add strength and security to the case.
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******