Loaded Mathews VXR 28 Bow Package- Stone Tactical and Black - Many DL/DW Available
For more detailed photos of this bow, please click on the link provided below:
This bow was used through the past two seasons.
It has been well cared for in that time, but does show the typical cosmetic wear one would expect from a two year old hunting bow.
I have only the bows you see listed to offer, no others.
I will work with you on putting together a package that is of most interest to you, but I am not interested in selling bare bow only.
- approximately 28" axle to axle
- 6" brace height
- up to 344 fps IBO
- 4.44 lbs (bare bow only)
Detailed Item Description
-Currently the bow is set up with 30 inch, 85% letoff, 65 pound modules (actually topping out at just over 68 pounds on my scale).
The draw length and draw weight can be changed by changing the mods on the bow.
This bow can be set up anywhere from 25.5 through 30 inches in draw length in either 80% or 85% when the correct draw modules are installed.
Those modules are also available in 60, 65, 70 or 75 pound max draw weights.
Each of those sets adjust around 10 pounds below the stated weight (so the 60 pound mods will drop to 48 pounds safely, the 65 to 53 pounds safely, the 70 to 58 pounds safely, and the 75 to 63 pounds safely).
I have modules in 85% in stock to set this bow at the following:
I have just a few in 80%. Those are as follows:
- 29.5"/75 lb
- 29.5"/70 lb
- 29"/65 lb
- 28"/65 lb
- 27"/70 lb
ONLY ONE set of the stated in stock draw modules will be installed on the bow and included with the purchase at this price.
If you do not see the module set you would prefer listed, I can order others in. This will though take some time, so if sold through the Buy It Now option here one of the module sets listed above will be installed and included.
-The limbs are in Factory Black finish. The limbs will differ in weight depending upon the SwitchWeight module set that is installed.
Peak weight can be turned down in the traditional way using the limb bolts, but other modules will also achieve this while keeping the bow in time and tune more effectively.
-The riser of the bow is in Factory Stone Tactical finish.
-The new Engage grip from Mathews is fantastic, and a great improvement over an already great grip in the previous models.
- The string and cable set are in good used condition. They are the original factory set of Zebra Trophy from Mathews that were ordered in custom red and black colors. I would rate them an 7.5 to 8 of 10, normal for two years worth of use.
-Peep sight is installed, aligned, served into place and is ready to shoot.
-String loop is installed and ready to shoot.
-The sight is a Brand New Trophy Ridge Fix-5 in black finish. Very nice sight. 5 pins, all in .019 size. Each pin is micro adjustable to consistently provide unparalleled accuracy. Aluminum construction, 2nd axis leveling, onboard adjustment tool. There is also a rheostat blue light added to the sight. The light mounts in the bracket of the sight, so that it shines only on the extended fibers of the pins. This eliminates any halo that can occur when lights are shined on the pins themselves and helps to eliminate any external light so that you do not spook any game when hunting.
I have many other sights as well if you are looking for something different. If you would prefer any other sight than the one shown, then please contact me BEFORE you make the purchase so that we can discuss any changes in pricing as well.
-The stabilizer is a Brand New Axion GLZ 5 inch in black finish. This is a nice stabilizer in both look and function. As can be seen, it has a Mathews Harmonic Stabilizer in the end as well as two Mathews Harmonic Dampeners in it. This helps to further reduce any noise and vibration while shooting along with matching the bow. It matches everything about the bow very well.
-The rest is a Mathews Edition QAD Ultra Pro Series series drop away in black. The launcher on the rest can be locked into the up position preshot to contain the arrow for you. That launcher will not drop away until the bow is drawn and shot. With the QAD, you can draw the bow and let back down without the rest dropping away. QAD is one of the only rests that do this as most other models reset when the bow is drawn. The QAD will not drop away until the bow has been shot.
All Pro series rests also carry a LifeTime Warranty through Mathews and a lock down feature that will prevent the rest from bouncing back up or vibrating after the shot.
MSRP on the rest when new is $170.
I also have some other rests that could be included with the bow. If you would prefer to have a different rest, please just contact me by email or phone and I can work something out with you to set this bow up with the accessories you want.
-12 BRAND NEW, uncut, GoldTip Hunter 340 spine carbon arrows are included. The inserts are included (you can see them in the picture). They are factory fletched in 2 inch vanes.
Again, these are 100 percent brand new, unshot, uncut arrows.
I have several other arrow options available as well. Each option will be factory fletched in different colors.
* If you would like me to, I can cut all of the arrows to length and install the inserts for you before shipping the bow.
The arrows I have in stock and pricing difference is as follows:
*GoldTip Hunter arrows in 500, 400, 340 or 300 spines-These can be included at the listed pricing.
*Easton Carbon Storm arrows in 400 or 350 spines-These can be included at the listed pricing.
Arrow upgrades available are as follows:
*Easton Bloodlines in 330 or 400 spines-These are an additional $45 over the currently listed arrow.
*Easton Axis SPT 5mm carbon arrows in 400, 340, 300 or 260 spines- These are an additional $45 over the currently lised arrows.
*Easton FMJ's (Full Metal Jacket) in 400, 340, 300 or 250 spines -These are an additional $85 over the currently listed arrows.
*Easton Axis 5mm carbon in 400, 340 or 300 spines - These are an additional $70 over the currently listed arrows.
*GoldTip Hunter XT arrows in 400, 340 or 300 spines - These are an additional $25 over the currently listed arrows.
*GoldTip Hunter Pro arrows in 340 or 300 spines- These are an additional $60 over the currently listed arrows.
---Should you be interested in purchasing any additional arrows please contact me for pricing per dozen---
-Also included is a Brand New quick detaching Trophy Ridge Hex Light 5 arrow quiver in Black finish. This is a very nice quiver in both look and function. It mounts securely to the mounting block in the back of the sight with a slight twist and closing of the latch- very quiet. When detached, all that remains is the very small, light-weight bracket on the back of your sight. Should you choose to shoot with the quiver in place, it is held securely there by design. There is a lot of adjustment on this quiver- both in height and closer or further from the bow- so that you can set it exactly as you prefer it for weight and balance. There is also an integrated hook for hanging when detached should you choose to shoot with the quiver detached.
The best part about the quiver though are the Green LED lights in the hood. There is one inside the hood to help you see the arrows when placing them in or out of the quiver. There are 3 green LED lights at the top of the hood that can be used to navigate in and out of the woods or see while on stand!
-All of this will be shipped in a brand new Plano Parallel Limb hard plastic case. This is a great case and will also insure that your bow arrives safe and sound! It has movable Pillars in it so that it can be adjusted specifically to fit your bow. The pillars add strength and security to the case.
MSRP on the case is $100.
****** Neither the bow stand nor the pad under the cam are included with this bow package. These are used only for the purpose of displaying the bow for the photographs you see here******